(2) JBL Control 424LP 4" Low Profile 70v/16-ohm Commercial In-Ceiling Speakers
(2) JBL Control 424LP 4" Low Profile 70v/16-ohm Commercial In-Ceiling Speakers
JBL
(2) JBL Control 424LP 4" Low Profile 70v/16-ohm Commercial In-Ceiling Speakers
(2) JBL Control 424LP 4" Low Profile 70v/16-ohm Commercial In-Ceiling Speakers
4" Low-Profile CRBI 70V Ceiling Speaker Pair, 60W, Under 4" Deep, Paintable Magnetic Grilles Included
Free Shipping
Features
- Coaxial 4 in treated paper-cone woofer and 0.75 in textile soft-dome tweeter
- 130 degrees conical coverage with 103 dB continuous pink noise maximum SPL at one meter
- 70V taps at 30 W, 15 W, 7.5 W, 3.7 W plus 16 ohms direct input
- Full-face magnetic grille is paintable and tethered to the baffle
- Low-profile enclosure under 100 mm deep for tight plenum spaces
Couldn't load pickup availability
What's Included in the box
- Two Control 424LP ceiling speakers
- Two full-face paintable magnetic grilles with safety tethers
- Two terminal covers with top and side cable entry
SKU: SKU: Control 424LP
View full details








Product Description
Integrated CRBI technology holds a consistent 130 degrees conical pattern across the listening area, reducing on-axis hot spots and off-axis cold spots so the sound character stays the same as people move through the space. Fewer speakers and fewer amplifier channels cover the same floor.
Frequency range is 75 Hz - 18 kHz with 60 W (240 W peak) continuous pink noise handling over two hours and 40 W (160 W peak) over 100 hours, reaching 103 dB continuous pink noise, 109 dB peak. Sensitivity is 85 dB and coverage is 130 degrees conical.
Wiring works either way. The built-in multi-tap transformer offers 70V taps at 30 W, 15 W, 7.5 W, 3.7 W (100V: 30 W, 15 W, 7.5 W), or connect directly at 16 ohms for a low-impedance amplifier.
The terminal cover gives both top and side cable entry, so conduit routing does not dictate speaker placement. The captive dogear design works across a wide range of ceiling thicknesses and holds position during tightening. Cutout size is 224 mm (8.8 in).
The full-face magnetic grille takes paint, so the speakers disappear into any ceiling color. Safety tethers mount directly into the baffle. Optional black round and white square grilles are available.
Rated IP33 per EN/IEC 60529 and listed for air handling spaces per UL 2043 and UL 1480A. Each speaker weighs 6.7 lb and measures 4.2 in H by 9.9 in in diameter.
Features
Consistent Sound As People Move
CRBI technology holds a 130 degrees conical pattern across the listening area, reducing hot spots underneath and cold spots between speakers.
One Model, Two Wiring Schemes
Built-in 70V and 100V taps handle distributed runs, while the 16 ohms direct input suits a local amplifier, so the same speaker fits either system.
Disappears Into The Ceiling
The full-face magnetic grille is paintable to match any ceiling color and mounts with safety tethers tied directly into the baffle.
Rated For Plenum Spaces
Listing under UL 2043, NFPA 90A, and NFPA 70 means the speaker is approved for air handling spaces, keeping inspections straightforward.
Fits Where Others Will Not
A low-profile enclosure under 100 mm deep installs in ceilings with restricted plenum space while keeping the same sound character as the deeper model.
Technical Specifications
- Product Type 4 in Low-Profile 70V In-Ceiling Speaker (Pair)
- Frequency Range (-10 dB) 75 Hz - 18 kHz
- Power Capacity 60 W (240 W peak) continuous pink noise (2 hrs), 40 W (160 W peak) (100 hrs)
- Sensitivity (1m/1W) 85 dB
- Coverage Angle 130 degrees conical
- Maximum SPL (1m) 103 dB continuous pink noise, 109 dB peak
- Nominal Impedance 16 ohms
- Transformer Taps 70V: 30 W, 15 W, 7.5 W, 3.7 W / 100V: 30 W, 15 W, 7.5 W
- Drivers Coaxial 4 in treated paper-cone woofer and 0.75 in textile soft-dome tweeter
- Ceiling Cutout Size 224 mm (8.8 in)
- Mounting Depth 3.9 in from bottom of ceiling tile to top of backcan
- Grille Full-face magnetic, white (RAL9003), paintable
- Environmental IP33 per EN/IEC 60529, operating temperature 0 to 45 degrees C
- Safety Agency UL 2043, NFPA 90A, NFPA 70, CSA C22.2 no. 205, UL 1480A
- Weight 6.7 lb each
- Dimensions 4.2 in H x 9.9 in diameter