(2) JBL Control 426LP 6.5" Low Profile 70v/12-ohm Commercial In-Ceiling Speakers
(2) JBL Control 426LP 6.5" Low Profile 70v/12-ohm Commercial In-Ceiling Speakers
JBL
(2) JBL Control 426LP 6.5" Low Profile 70v/12-ohm Commercial In-Ceiling Speakers
(2) JBL Control 426LP 6.5" Low Profile 70v/12-ohm Commercial In-Ceiling Speakers
6.5" Low-Profile Ceiling Speakers, 110 W, 70V/100V/12-Ohm, Pair With Paintable Magnetic Grilles
Free Shipping
Features
- Low-profile enclosure under 100 mm deep for ceilings with restricted plenum space
- 6.5-inch woofer and 1-inch soft-dome tweeter in a coaxial two-way design
- CRBI technology holds 110-degree coverage matched to the Control 426C/T
- 70V/100V multi-tap transformer plus 12-ohm direct input for low-impedance runs
- IP33 rated and UL2043 listed for use in air-handling ceiling spaces
Couldn't load pickup availability
What's Included in the box
- (2) Control 426LP Ceiling Speakers
- (2) White Full-Face Magnetic Grilles
- (2) Terminal Covers
SKU: SKU: Control 426LP
View full details








Product Description
Features
Built For Shallow Ceilings
The enclosure is under 100 mm deep and sits only 3.9 in above the tile, so it installs in plenums that cannot take a full-depth ceiling speaker.
Matched To The Control 426C/T
CRBI technology gives the same 110-degree coverage pattern and tonal character, so you can mix low-profile and standard models across one building without audible changes.
Wiring Flexibility
The multi-tap transformer handles 70V and 100V distributed lines at four tap settings, while the 12-ohm direct input covers low-impedance wiring on smaller systems.
Tool-Free Terminal Access
Terminal covers offer top and side cable entry and close with captive hand-screws, cutting installation time on long runs of ceiling speakers.
Clean Ceiling Appearance
The full-face magnetic grille sits flush and accepts paint, with a safety tether anchored into the baffle for added security overhead.
Technical Specifications
- Product Type 6.5" Two-Way Low-Profile In-Ceiling Speaker (Pair)
- Frequency Range (-10 dB) 95 Hz - 19 kHz
- Power Capacity 110 W (440 W peak), continuous pink noise (2 hrs)
- Sensitivity (1m/1W) 89 dB
- Coverage Angle 110 degrees conical
- Maximum SPL (1m) 109 dB continuous, 115 dB peak
- Nominal Impedance 12 ohms
- Transformer Taps 70V: 60 W, 30 W, 15 W, 7.5 W; 100V: 60 W, 30 W, 15 W
- LF Driver 165 mm (6.5 in) treated paper cone
- HF Driver 25 mm (1.0 in) textile soft dome, neodymium magnet
- Ceiling Cutout Size 223 mm (8.8 in)
- Mounting Depth 98 mm (3.9 in) from bottom of ceiling tile to top of backcan
- Environmental Rating IP33 per EN/IEC 60529
- Operating Temperature 0 C to 45 C
- Color White (RAL9003), paintable
- Weight 8.6 lb each
- Dimensions 4.2 in H x 9.9 in dia.