Skip to product information
1 of 11

JBL

Pair JBL SLP12/T-BK Sleek Low-Profile On Wall Mount 3" 70v Commercial Speakers

Pair JBL SLP12/T-BK Sleek Low-Profile On Wall Mount 3" 70v Commercial Speakers

Pair Of 3" On-Wall Speakers, 40W, 70V/100V Taps, Black, Slide-In Bracket And Rain Cover

Free Shipping

Regular price $280.00
Sale price $280.00 Regular price $254.00
Shipping calculated at checkout.
Features
    • 75 mm (3") full-range driver covers 74 Hz to 20 kHz
    • Wide 120 by 120 degree coverage from a low-profile cabinet
    • 15 degree down-tilt allows flush-to-wall mounting
    • Under 4 inches deep and ADA compliant
    • 15W multi-tap transformer for 70V and 100V lines plus 8 ohm
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • 2 x SLP12/T On-Wall Loudspeakers (Black)
    • 2 x Slide-On Wall Brackets (Speaker And Wall Sides)
    • 2 x 4-Pin Euroblock Plugs
    • 2 x Protective Terminal Covers For Outdoor Use

SKU: SKU: JBL-SLP12/T-BK

View full details

Product Description

The JBL SLP12/T is a low-profile on-wall loudspeaker in black, sold here as a pair. A 75 mm (3-inch) full-range driver covers 74 Hz to 20 kHz with 120 by 120 degree coverage, which spreads sound widely in the small-to-mid rooms these speakers usually serve.

The cabinet is under 4 inches deep, which meets ADA requirements for wall-mounted objects in commercial spaces. Coverage is tilted 15 degrees downward by design, so the speaker mounts flush against the wall and still aims at people rather than the far wall. That combination is why these end up in restaurants, hotels, resorts and retail stores where the look matters as much as the sound.

Installation uses an included slide-in wall bracket: mount the wall half, run your wire, and slide the speaker on. An included rain cover protects the terminal compartment in protected outdoor locations such as covered patios.

A 15W multi-tap transformer serves 70V and 100V systems with taps at 15W, 7.5W, 3.8W and 1.9W, and the speaker switches to direct 8-ohm operation. Power handling is 40W continuous pink noise with 160W peak and 106 dB peak SPL. Terminals are 4-pin Euroblock accepting 24 to 14 AWG. The polycarbonate and ABS enclosure is UL94V-0 rated and weighs 4.2 lb per speaker.

Features

    • Sound Without A Visible Speaker Box

      A cabinet under 4 inches deep sits close to the wall and meets ADA depth requirements, keeping high-finish rooms looking finished.

    • Aimed At People, Mounted Flat

      Fifteen degrees of down-tilt are built into the coverage, so the speaker points at listeners while the cabinet stays flush against the wall.

    • Wide Coverage From A Small Driver

      A 75 mm full-range driver with 120 by 120 degree dispersion spreads sound evenly, so fewer speakers cover a dining room or retail floor.

    • Install In Two Steps

      The included slide-in wall bracket mounts and wires first, then the speaker slides on, which cuts time on ladders during finish-out.

    • Ready For Covered Outdoor Spots

      An included rain cover protects the terminal compartment, making patios, breezeway ceilings and other protected exterior areas viable install locations.

Technical Specifications

  • Product Type 3" Full-Range On-Wall Loudspeaker (Pair)
  • Driver 75 mm (3 in) Full-Range, Polypropylene Cone, 20 mm Voice Coil
  • Frequency Range (-10 dB) 74 Hz - 20 kHz
  • Frequency Response (+/-3 dB) 91 Hz - 18 kHz
  • Power Rating 40W (160W Peak) Continuous Pink Noise (2 hrs), 20W (80W Peak) Continuous Pink Noise (100 hrs), 80W Continuous Program
  • Sensitivity 84 dB Half-Space
  • Maximum SPL 106 dB Peak, 100 dB Continuous @ 1m
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov