JBL Pro JRX215 1,000 Watt 15" Inch 2-Way Passive DJ P/A Speaker Cabinet - NEW!
JBL
JBL Pro JRX215 1,000 Watt 15" Inch 2-Way Passive DJ P/A Speaker Cabinet - NEW!
JBL Pro JRX215 1,000 Watt 15" Inch 2-Way Passive DJ P/A Speaker Cabinet - NEW!
15" Passive Two-Way PA Speaker, 1,000W Peak, 8 Ohms, Speakon And 1/4" Inputs, Pole Socket
Free Shipping
Features
- 250W RMS and 1,000W peak handling at 8 ohms
- 15" woofer extends low frequency response down to 41 Hz
- High 99 dB sensitivity reaches 129 dB max SPL
- JBL 2414H-C compression driver on Progressive Transition waveguide
- Dual-angle pole socket tilts the cabinet 10 degrees
Couldn't load pickup availability
What's Included in the box
- JRX215 Passive Loudspeaker
SKU: SKU: JRX215
View full details





Product Description
The 15-inch format is the reason to pick this over the 12-inch cabinet: low-frequency extension to 41 Hz carries kick and bass in rooms where a smaller woofer starts to thin out. High 99 dB sensitivity means a 250W to 500W per channel amplifier reaches full output.
The low-frequency driver is a JBL M115-8A with a 64 mm edge-wound ribbon voice coil, paired with a JBL 2414H-C 1-inch polymer diaphragm compression driver on a Progressive Transition waveguide. The crossover uses high-voltage capacitors and heavy gauge inductors, and SonicGuard shields the compression driver from excess power without interrupting the performance.
The enclosure is 19 mm MDF with non-resonant all-steel handles and an 18-gauge hexagon perforated steel grille. A 36 mm dual-angle pole-mount socket allows a 10 degree tilt on a stand. Inputs are a parallel Neutrik Speakon NL-4 and a 1/4-inch TS jack. Weight is 60.5 lb.
Features
-
Low End From A Passive Box
A JBL M115-8A 15-inch woofer reaches 41 Hz, carrying kick and bass in rooms where a 12-inch cabinet starts to thin out.
-
Loud On Modest Amplifier Power
A sensitivity rating of 99 dB means a 250W to 500W per channel amplifier reaches full 129 dB output without pushing the amp into clipping.
-
Consistent Coverage Across The Room
The 2414H-C compression driver sits on a Progressive Transition waveguide, holding a steady 90 by 50 degree pattern instead of narrowing at high frequencies.
-
Protection That Does Not Interrupt
SonicGuard limits excess power reaching the high-frequency driver without muting the system, so a hot signal does not stop the show.
-
Built For Load-In And Load-Out
A 19 mm MDF enclosure, non-resonant all-steel handles and an 18-gauge perforated steel grille hold up to repeated transport at 60.5 lb.
Technical Specifications
- Product Type 15" Passive Two-Way Loudspeaker
- Low Frequency Driver JBL M115-8A With 64 mm (2.5 in) Edge-Wound Ribbon Voice Coil
- High Frequency Driver JBL 2414H-C 1" Exit Compression Driver On Progressive Transition Waveguide
- Power Rating 250W RMS / 1,000W Peak
- Nominal Impedance 8 Ohms
- Recommended Amplifier Power 250W to 500W Into 8 Ohms
- Sensitivity (1W/1m) 99 dB SPL
- Maximum SPL 129 dB
- Frequency Range (-10 dB) 41 Hz - 18 kHz
- Frequency Response (+/-3 dB) 59 Hz - 13 kHz
- Nominal Dispersion 90 degrees x 50 degrees
- Crossover Frequency 2.2 kHz
- Input Connectors Neutrik Speakon NL-4 (x1), 1/4" TS Phone Jack (x1), Parallel
- Enclosure 19 mm (0.75 in) MDF
- Grille 18-Gauge Powder-Coated Perforated Steel
- Mounting 36 mm Dual-Angle Pole-Mount Socket, 10 degree Tilt
- Weight 60.5 lb
- Dimensions (H x W x D) 27.5 x 18.1 x 17 in