JBL VRX932LAP Powered Active 12" 1750 Watt 2-Way Line Array Speaker System w/DSP

The VRX932LAP is a powered 12-inch two-way line array cabinet designed for arrays of up to five units, aimed at crews who need array coverage and a fast setup with no amp racks in the truck. The built-in JBL DrivePack DPC-2 amplifier module supplies 1,750W of peak power, split as 750W to the low-frequency section and 125W to the high-frequency section, and the DSP-based input module carries system optimization and EQ inside the cabinet. Maximum output is 136 dB SPL. A JBL 2262FF 12-inch neodymium Differential Drive woofer keeps weight at 52 lb, and three 2408J annular ring diaphragm compression drivers sit on a Constant Curvature waveguide that continues across every cabinet in the array. Array Configuration Selector switches allow array shading, so the top box reaches the back of a room while lower boxes are pulled back for the front rows. Coverage runs 100 by 15 degrees nominal with response from 57 Hz to 20 kHz. Inputs are XLR with loop through and an input attenuator from 0 to 16 dB, and AC uses PowerCon connectors with loop through, drawing 6A per system at 120V. Integral rigging hardware and the optional VRX-AF frame handle flown work, while an internal dual-angle 36 mm pole cup covers pole or tripod mounting for smaller rooms.