Kicker Powersports 10PS5250 5.25” Harley Davidson Motorcycle Speakers PS5250
Kicker
Kicker Powersports 10PS5250 5.25” Harley Davidson Motorcycle Speakers PS5250
Kicker Powersports 10PS5250 5.25” Harley Davidson Motorcycle Speakers PS5250
5.25" Coaxial Motorcycle Speakers, 2-Ohm, 100W Peak, Pair, Bat-Wing Fairing Grilles Included
Free Shipping
Features
- Pair of 2-ohm 5.25-inch coaxial speakers rated 100W peak and 50W RMS each
- Weather-resistant build for motorcycle, ATV, UTV, marine, and outdoor use
- Neodymium midbass motor holds each speaker to just 12.6 oz
- 20mm neo-titanium-dome tweeters bridge-mounted over the cone center
- Includes replacement grilles for Harley-Davidson Bat-Wing fairings
Couldn't load pickup availability
What's Included in the box
- 2 x PS5250 5.25" Coaxial Speakers
- Replacement Grilles For Harley-Davidson Bat-Wing Fairings
SKU: SKU: 10PS5250
View full details





Product Description
Each speaker handles 100W peak and 50W RMS, and an 88.3 dB sensitivity rating pulls usable volume out of a stock head unit. The midbass runs a rare-earth neodymium motor, roughly ten times stronger per pound than a standard ceramic magnet, so output stays high while each speaker weighs only 12.6 oz. That number matters on a bike: heavy speakers mounted high in a fairing raise the center of gravity and change how the machine handles.
Copper-clad aluminum voice coils keep moving mass low, and a finned aluminum heat sink pulls heat out of the motor for longer power handling on long rides. Polypropylene cones on inverted surrounds get more excursion out of a compact frame. The 20mm neo-titanium-dome tweeters are bridge-mounted over the center of each cone, a layout that stands up to constant vibration and keeps vocal detail audible over wind and exhaust noise through a helmet.
Frequency response runs 60 Hz to 20 kHz. Mounting takes a 4-7/8 in hole with 2-3/16 in of depth behind it, which also makes the pair a fit for ATV, UTV, marine, and outdoor enclosures. Replacement grilles for Harley-Davidson Bat-Wing fairings are included; other fairings keep the factory grille.
Features
-
Built To Stay Outside
Weather-resistant materials and adhesives throughout let the pair stay mounted in an open fairing through rain, sun, and road spray without breaking down.
-
Light Where It Counts
Neodymium motors hold each speaker to 12.6 oz, so adding sound to a fairing does not raise the center of gravity or change how the bike handles.
-
Heard Over The Road
88.3 dB sensitivity and 50W RMS handling give volume that stays audible through a helmet at highway speed, even on a stock head unit.
-
Tweeters That Take Vibration
Bridge-mounted 20mm neo-titanium domes sit over each cone center, a mount built to hold detail steady under constant engine and road vibration.
-
Longer Power Handling
Copper-clad aluminum voice coils and a finned aluminum heat sink pull heat away from the motor, keeping output steady on long rides.
Technical Specifications
- Product Type Coaxial Motorcycle Speakers (Pair)
- Woofer Size 5.25" (13.3 cm)
- Tweeter Size 3/4" (20 mm)
- Peak Power 100W
- RMS Power 50W
- Impedance 2 Ohms
- Sensitivity 88.3 dB
- Frequency Response 60 - 20,000 Hz
- Grilles Included Yes, Fits Harley-Davidson Bat-Wing Fairing
- Mounting Hole Diameter 4-7/8" (12.4 cm)
- Mounting Depth 2-3/16" (5.6 cm)
- Weight 12.6 oz (358 g) Per Speaker