Skip to product information
1 of 15

Kicker

(2) 45KM104 10" 350W Marine Subwoofers + Mono Amplifier + Wire Kit

(2) 45KM104 10" 350W Marine Subwoofers + Mono Amplifier + Wire Kit

10" Marine Subwoofers, 350W Each, Mono Amplifier, Waterproof Wire Kit Included

Free Shipping

Regular price $485.99
Sale price $485.99 Regular price $729.88
Save 33%
Shipping calculated at checkout.
Features
    • Pair of 10" marine subwoofers rated at 175W RMS / 350W peak each
    • dBM12 mono amplifier delivers 500W Dyno-Certified RMS at 2 ohms
    • Conformal-coated amp and sealed subs resist salt spray and moisture
    • Bass remote lets you adjust low end from the dash
    • 4 AWG waterproof wire kit covers power, ground, RCA, and speaker runs
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • (2) 10" 4-Ohm Marine Coaxial-Style Subwoofers
    • (1) dB Marine Series Mono Amplifier
    • Bass remote control
    • Terminal covers
    • (1) 4 AWG Waterproof Marine Amplifier Install Wire Kit
    • RCA cable, power and ground cable, speaker wire, and remote wire
    • ANL fuse holder with fuses, terminals, and cable ties

SKU: SKU: (2) 45KM104+DBM12+RMWK4

View full details

Product Description

This package puts a matched pair of Kicker 45KM104 10-inch marine subwoofers, a Rockville dBM12 mono amplifier, and a full 4 AWG wire kit into one order, so a boat gets deep bass without piecing together separate parts. Each KM104 sub uses an injection-molded polypropylene cone with a co-molded Santoprene surround and a sealed, splash-resistant motor structure, so it holds up against sun, spray, and salt air. Stainless mounting hardware and a protective terminal cap keep corrosion away, and the sub works in a sealed or ported enclosure sized between 1 and 2.4 cubic feet. Powering both subs is the dBM12, a mono Class D amplifier rated at 2000 watts peak and 500 watts Dyno-Certified RMS at 2 ohms. Its conformal-coated circuit board, waterproof silicone terminal covers, and rustproof aluminum heat sink are built specifically for the water, and an included bass remote lets you dial in low end from the dash instead of reaching for the amp. Rounding out the kit, the RMWK4 4-gauge wire kit supplies waterproof power, ground, RCA, speaker, and remote wire along with a fused mini-ANL fuse holder and terminals, covering the full run from battery to amp to subwoofer. Together, the three pieces give a boat owner everything needed to add real, verified bass output to a factory or upgraded marine audio system in a single order, without hunting down a compatible amplifier or wiring separately.

Features

    • Two Matched Marine Subwoofers

      A pair of 10-inch KM104 subs, each rated for 175 watts RMS, share identical specs so wiring them together delivers even, balanced bass instead of mismatched output.

    • Dyno-Certified Amplifier Power

      The dBM12 delivers 500 watts RMS at 2 ohms, verified on a dyno rather than an inflated peak-only figure, so the output on paper matches what you actually hear.

    • Sealed Against The Elements

      A conformal-coated amp board, waterproof terminal covers, and sealed sub motors keep spray and humidity out of the electronics, so the system keeps working season after season.

    • Dash-Mounted Bass Control

      The included remote lets you adjust bass level from the driver's seat without reaching for the amplifier itself, making fine-tuning easy while underway on the water.

    • Everything Needed To Wire It

      A 4 AWG wire kit with power, ground, RCA, speaker, and remote wire completes the amp-to-sub connection, so there's no separate wire order to place before installing.

Technical Specifications

  • Product Type Marine Subwoofer & Amplifier Package
  • Speaker Size 10"
  • RMS Power Handling 175W per Subwoofer
  • Peak Power Handling 350W per Subwoofer
  • Impedance 4 Ohms
  • Frequency Response 30Hz - 500Hz
  • Mounting Depth 5"
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov