Skip to product information
1 of 14

Kicker

(2) 45KM124 12" 350W Marine Subwoofers + Mono Amplifier + Wire Kit

(2) 45KM124 12" 350W Marine Subwoofers + Mono Amplifier + Wire Kit

12" Marine Subwoofers, 350W Each, Mono Amplifier, Waterproof Wire Kit Included

Free Shipping

Regular price $518.13
Sale price $518.13 Regular price $829.88
Save 37%
Shipping calculated at checkout.
Features
    • Pair of 12" marine subwoofers rated at 175W RMS / 350W peak each
    • dBM12 mono amplifier delivers 500W Dyno-Certified RMS at 2 ohms
    • Conformal-coated amp and sealed subs resist salt spray and moisture
    • Bass remote lets you adjust low end from the dash
    • 4 AWG waterproof wire kit covers power, ground, RCA, and speaker runs
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • (2) 12" Marine Subwoofers
    • (1) dB Marine Series Mono Amplifier
    • Bass remote control
    • Terminal covers
    • (1) 4 AWG Waterproof Marine Amplifier Install Wire Kit
    • RCA cable, power and ground cable, speaker wire, and remote wire
    • ANL fuse holder with fuses, terminals, and cable ties

SKU: SKU: (2) 45KM124+DBM12+RMWK4

View full details

Product Description

This package pairs two Kicker 45KM124 12-inch marine subwoofers with a Rockville dBM12 mono amplifier and a full 4 AWG wire kit, giving a boat serious low end without sourcing three separate products. Each KM124 sub uses an injection-molded polypropylene cone, a co-molded Santoprene surround, and a sealed motor structure built to handle sun, salt, and spray, with stainless mounting hardware and a protective terminal cap adding long-term corrosion resistance. The 12-inch driver works in a sealed enclosure between 1.25 and 3.5 cubic feet or a vented box between 1.75 and 2.25 cubic feet, giving an installer room to match the box to the boat. Driving both subs is the dBM12, a mono Class D amplifier rated at 2000 watts peak and 500 watts Dyno-Certified RMS at 2 ohms, with a conformal-coated board, waterproof silicone terminal covers, and a rustproof aluminum heat sink built specifically for marine use. A bass remote ships with the amp so you can adjust low end from the dash. The RMWK4 wire kit completes the install with waterproof 4-gauge power and ground cable, RCA cable, speaker wire, remote wire, and a fused mini-ANL fuse holder, covering the full run from battery to amplifier to subwoofer. Together, this kit turns a factory marine stereo into a system with real bass output, matched and ready to wire in one afternoon.

Features

    • Two Matched Marine Subwoofers

      A pair of 12-inch KM124 subs, each rated for 175 watts RMS, share identical specs so wiring them together delivers even, balanced bass instead of mismatched output.

    • Dyno-Certified Amplifier Power

      The dBM12 delivers 500 watts RMS at 2 ohms, verified on a dyno rather than an inflated peak-only figure, so the output on paper matches what you actually hear.

    • Sealed Against The Elements

      A conformal-coated amp board, waterproof terminal covers, and sealed sub motors keep spray and humidity out of the electronics, so the system keeps working season after season.

    • Dash-Mounted Bass Control

      The included remote lets you adjust bass level from the driver's seat without reaching for the amplifier itself, making fine-tuning easy while underway on the water.

    • Everything Needed To Wire It

      A 4 AWG wire kit with power, ground, RCA, speaker, and remote wire completes the amp-to-sub connection, so there's no separate wire order to place before installing.

Technical Specifications

  • Product Type Marine Subwoofer & Amplifier Package
  • Speaker Size 12"
  • RMS Power Handling 175W per Subwoofer
  • Peak Power Handling 350W per Subwoofer
  • Impedance 2 Ohms
  • Frequency Response 30Hz - 500Hz
  • Mounting Depth 5.5"
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov