43CVT102 CompVT 10" Subwoofer with RS10 Sealed Enclosure & Install Kit

This bundle pairs the Kicker 43CVT102 CompVT 10-inch subwoofer with a Rockville RS10 sealed enclosure and a complete installation kit, giving you a ready-to-wire bass system out of the box. The CompVT is a shallow-mount subwoofer with a 4-1/4 inch mounting depth, a four-layer voice coil, and full perimeter venting, handling 800W peak and 400W RMS at 2 ohms. The RS10 is a single 10-inch sealed enclosure built in the USA from 3/4-inch MDF, with machine-precision cut mounting holes and gold spring-loaded terminals. Every seam is glued, stapled, and sealed with a layer of silicone, and the box measures 16 by 13.25 by 13.25 inches with a net internal volume of 0.75 cubic feet, sized within the subwoofer's recommended sealed range. The installation kit adds ten wood screws selected to bite into the enclosure cleanly, 12 feet of 14-gauge speaker wire, a step up from the more common 16-gauge, and two spade terminals for a secure connection at the amplifier end. Together, the three pieces take out the two most common points of failure in a subwoofer install: an enclosure sized wrong for the driver, and wiring too thin to carry a clean signal, leaving you with a subwoofer that's ready to bolt in and wire up.