Skip to product information
1 of 10
Used

Kicker

43VC124 [Used]

43VC124 [Used]

12" Comp Subwoofer, 4-Ohm, Loaded in Vented Ported Enclosure

Free Shipping

Regular price $199.95
Sale price $199.95 Regular price $219.99
Save 9%
Shipping calculated at checkout.
Features
    • Comp 12" subwoofer pre-loaded into a vented ported box
    • Handles 300W peak / 150W RMS at 4 ohms
    • Custom-tuned port design boosts output in a small footprint
    • High-density MDF construction with a black carpet finish
    • 360-degree back bracing keeps bass free of distortion
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Kicker 43VC124 Comp 12" Subwoofer Loaded in Vented Enclosure

SKU: SKU: 43VC124*

View full details

Product Description

The Kicker 43VC124 is a Comp 12-inch subwoofer pre-mounted in a vented, single 4-ohm enclosure built with a custom-tuned port to squeeze extra bass output out of a compact footprint. Kicker's 2016 Comp design uses a thick polypropylene woofer cone with a high-density, UV-treated rubber surround, and 360-degree back bracing keeps the cone rigid so output stays clean rather than distorted when the box is pushed. A high-temperature voice coil supports sustained power handling, and the subwoofer delivers a 27 to 500 Hz frequency response at 90 dB sensitivity.

The enclosure is built from high-density MDF, finished in a stylish black carpet, and vented through a single round port tuned to work with the loaded subwoofer. It handles 300 watts peak and 150 watts RMS, with Kicker recommending 150 watts of amplifier power for best results. Because the subwoofer arrives already mounted and ported, installation is a matter of running power and signal wires rather than building or tuning a box from scratch.

Features

    • Custom-Tuned Port Design

      The vented enclosure's tuned port squeezes a new level of bass output out of a small overall footprint.

    • Rigid Cone For Cleaner Bass

      A thick polypropylene cone with a UV-treated rubber surround and 360-degree back bracing keeps distortion low under power.

    • Built to Handle Real Power

      A high-temperature voice coil and the Comp design support up to 300 watts peak and 150 watts RMS.

    • Durable Black Carpet Finish

      High-density MDF construction wrapped in a stylish black carpet gives the box a clean, finished look.

    • Pre-Loaded For Simple Installation

      Since the subwoofer arrives already mounted and ported, setup comes down to running power and signal wiring.

Technical Specifications

  • Product Type Loaded Subwoofer Enclosure
  • Subwoofer Size 12 in (30 cm)
  • Impedance 4 Ohms
  • Power Handling 300 W Peak / 150 W RMS
  • Recommended Power 150 W
  • Frequency Response 27 - 500 Hz
  • Sensitivity 90 dB
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov