50CVX102 COMPVX 10" Subwoofer with Sealed Sub Box Enclosure
Kicker
50CVX102 COMPVX 10" Subwoofer with Sealed Sub Box Enclosure
50CVX102 COMPVX 10" Subwoofer with Sealed Sub Box Enclosure
10" CompVX Subwoofer, 2-Ohm DVC, With Sealed Enclosure and Install Kit
Free Shipping
Features
- CompVX 10" subwoofer with dual 2-ohm voice coils
- Handles up to 1200W peak / 600W RMS
- 0.75 cu. ft. sealed enclosure built in the USA from 3/4" MDF
- Cast aluminum basket with motor-cooling perimeter venting
- Install kit includes screws, 14-gauge wire, and spade terminals
Couldn't load pickup availability
What's Included in the box
- Kicker 50CVX102 COMPVX 10" Subwoofer
- Rockville Single 10" 0.75 cu. ft. Sealed Sub Enclosure
- 10 Drywall Wood Screws
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
- Two Kicker Stickers
SKU: SKU: 44CVX102+RS10+K1
View full details










Product Description
The included Rockville enclosure is built in the USA from 3/4-inch Grade A MDF, glued, stapled, and sealed with silicone at every seam so the carpet stays put and the box resists flexing under pressure. A full installation kit finishes the job with 10 drywall wood screws selected to avoid chipping the enclosure, 12 feet of 14-gauge speaker wire, and two spade terminals, giving a complete path from amplifier to subwoofer without sourcing separate hardware.
Features
Cast Aluminum Basket
Motor-cooling perimeter venting and spring-loaded terminals that accept up to 10-gauge wire keep the subwoofer running cool under sustained power.
Reinforced For Loud Bass
A poly-cotton, semi-progressive-roll spider and ribbed Santoprene surround stabilize the cone at maximum excursion for distortion-free output.
USA-Built Sealed Enclosure
Precision-cut 3/4-inch Grade A MDF, glued, stapled, and silicone-sealed at every joint, keeps the carpet in place and the box rigid.
Complete Install Kit Included
Hand-selected drywall screws, 14-gauge speaker wire, and spade terminals cover the full connection from enclosure to amplifier.
Built For High Power Handling
A UniPlate extended pole piece and backplate manage heat dissipation, supporting up to 1200 watts peak per subwoofer.
Technical Specifications
- Product Type Subwoofer and Sealed Enclosure Combo
- Subwoofer Size 10 in, 25 cm
- Impedance 2 Ohms DVC
- Recommended Amplifier Power 600 W RMS
- Peak Power 1200 W
- Sensitivity 85.7 dB
- Frequency Response 24 - 500 Hz
- Enclosure Type Sealed, 0.75 cu. ft. Net
- Enclosure Material 3/4 in MDF, Made in the USA
- Enclosure Dimensions 16 in L x 13.25 in W x 13.25 in H