44CVX102 + RSV10 + K1
Kicker
44CVX102 + RSV10 + K1
44CVX102 + RSV10 + K1
10" CompVX Subwoofer, 2-Ohm DVC, With Vented Enclosure and Install Kit
Free Shipping
Features
- CompVX 10" subwoofer with dual 2-ohm voice coils
- Handles up to 1200W peak / 600W RMS
- 1.0 cu. ft. vented enclosure tuned to 37 Hz
- Cast aluminum basket with motor-cooling perimeter venting
- Install kit includes screws, 14-gauge wire, and spade terminals
Couldn't load pickup availability
What's Included in the box
- Kicker 50CVX102 COMPVX 10" Subwoofer
- Rockville Single 10" 1.0 cu. ft. Vented Sub Enclosure
- 10 Drywall Wood Screws
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
- Two Kicker Stickers
SKU: SKU: 44CVX102+RSV10+K1
View full details










Product Description
The included Rockville RSV10 enclosure is built in the USA from 3/4-inch Grade A MDF, glued, stapled, and sealed with silicone at every seam so the carpet stays put and the box resists flexing under pressure. Its port is sized at 2 by 18.5 by 10.5 inches to reach the 37 Hz tuning, giving the CompVX room to move air for deeper, louder bass than a sealed box of similar size. A full installation kit finishes the job with 10 drywall wood screws selected to avoid chipping the enclosure, 12 feet of 14-gauge speaker wire, and two spade terminals.
Features
Cast Aluminum Basket
Motor-cooling perimeter venting and spring-loaded terminals that accept up to 10-gauge wire keep the subwoofer running cool under sustained power.
Reinforced For Loud Bass
A poly-cotton, semi-progressive-roll spider and ribbed Santoprene surround stabilize the cone at maximum excursion for distortion-free output.
Tuned Port For Deeper Bass
The enclosure's port is sized to reach a 37 Hz tuning frequency, giving the subwoofer more low-end output than a similarly sized sealed box.
USA-Built Vented Enclosure
Precision-cut 3/4-inch Grade A MDF, glued, stapled, and silicone-sealed at every joint, keeps the carpet in place and the box rigid.
Complete Install Kit Included
Hand-selected drywall screws, 14-gauge speaker wire, and spade terminals cover the full connection from enclosure to amplifier.
Technical Specifications
- Product Type Subwoofer and Vented Enclosure Combo
- Subwoofer Size 10 in, 25 cm
- Impedance 2 Ohms DVC
- Recommended Amplifier Power 600 W RMS
- Peak Power 1200 W
- Sensitivity 85.7 dB
- Frequency Response 24 - 500 Hz
- Enclosure Type Vented, 1.0 cu. ft. Net, Tuned to 37 Hz
- Enclosure Material 3/4 in MDF, Made in the USA
- Enclosure Dimensions 14.25 in L x 16.0 in W x 12.0 in H