KICKER 45KM124 12" 350w Peak/175w RMS Marine Boat Subwoofer SVC 4-ohm Sub KM12
Kicker
KICKER 45KM124 12" 350w Peak/175w RMS Marine Boat Subwoofer SVC 4-ohm Sub KM12
KICKER 45KM124 12" 350w Peak/175w RMS Marine Boat Subwoofer SVC 4-ohm Sub KM12
Marine Subwoofer, 12-Inch, 175W RMS, 4-Ohm Single Voice Coil, Back Gasket, Stainless Mounting Hardware Included
Free Shipping
Features
- 175 W RMS and 350 W peak power handling from a 12-inch marine sub
- Single 4-ohm voice coil wires easily to a compact marine amplifier
- UV-treated polypropylene cone with co-molded Santoprene surround
- Polymer basket and terminal cap resist salt water corrosion
- Meets or exceeds ASTM standards for UV and salt/fog exposure
Couldn't load pickup availability
What's Included in the box
- One 12-inch marine woofer
- One back gasket
- Eight mounting screws
- Eight mounting screw clips
SKU: SKU: 45KM124
View full details








Product Description
Every part of this sub is made for open water. The injection-molded polypropylene cone and co-molded Santoprene surround handle sun and moisture, the polymer basket resists corrosion, and a protective terminal cap keeps spray off the connections. The sub meets or exceeds ASTM standards for UV and salt/fog exposure, so it holds up in fresh and salt water alike.
Power handling is 175 W RMS and 350 W peak through a single 4-ohm voice coil, a straightforward match for a compact marine amplifier. A UniPlate back plate and pole piece, thick tinsel leads, and a large ceramic magnet keep output steady when you push the volume for hours at anchor.
Frequency response runs 30 Hz to 500 Hz. Mounting depth is 5.5 in with a 11 in cutout, and the rear gasket plus stainless mounting hardware needed for a sealed, rattle-free install come in the box.
Features
-
Bass Your Boat Can Feel
Rated 175 W RMS and 350 W peak, this 12-inch sub adds the low end a factory boat system misses, without needing a large amplifier.
-
Made For Salt And Spray
A corrosion-resistant polymer basket, sealed motor, and protective terminal cap meet ASTM standards for UV and salt/fog exposure season after season.
-
Cone Material That Holds Up
The injection-molded polypropylene cone and co-molded Santoprene surround keep their shape under direct sun, moisture, and long hours of output.
-
Simple 4-Ohm Wiring
A single 4-ohm voice coil connects with one run of wire, keeping the install clean and quick in tight bilge and console spaces.
-
Sealed Or Ported, Your Call
Recommended sealed volume of 1.25 - 3.5 cu ft lets you tune for tight punch or deeper output based on the space you actually have onboard.
Technical Specifications
- Product Type Marine Subwoofer
- Woofer Size 12 in
- RMS Power Handling 175 W
- Peak Power Handling 350 W
- Impedance 4 Ohms
- Voice Coil Single 4-Ohm
- Frequency Response 30 Hz - 500 Hz
- Mounting Depth 5.5 in
- Hole Diameter 11 in
- Sealed Enclosure Volume 1.25 - 3.5 cu ft
- Vented Enclosure Volume 1.75 - 2.25 cu ft
- Outer Diameter 13 in