45KM654L LED Speakers + MAC65B Tower Pods + RXM-T1 Amplifier + 4 Gauge Wire Kit
Kicker
45KM654L LED Speakers + MAC65B Tower Pods + RXM-T1 Amplifier + 4 Gauge Wire Kit
45KM654L LED Speakers + MAC65B Tower Pods + RXM-T1 Amplifier + 4 Gauge Wire Kit
Pair 6.5" Marine LED Speakers, Black Tower Pods, 1500W Amplifier, 4 Gauge Wire Kit
Free Shipping
Features
- Pair of 6.5-inch LED marine speakers, 65W RMS, 195W peak per speaker
- 3/4-inch titanium tweeter delivers 90dB sensitivity for clear highs
- Locking, sealed terminal covers keep moisture off connections
- Black aircraft-grade aluminum tower pods with internal wiring, no exposed terminals
- RXM-T1 amplifier delivers 370W Dyno-Certified RMS bridged at 4 ohms
Couldn't load pickup availability
What's Included in the box
- Pair of 6.5" 4-ohm coaxial speakers
- 8 mounting screws
- 8 mounting screw clips
- 2 wire connection covers
- 2 zip ties
- Pair of MAC65B aluminum tower enclosures
- Rubber tubing adapter inserts (2", 2.25", 2.375", 2.5")
- Mounting hardware
- RXM-T1 2-channel marine amplifier
- 20' RCA cable
- 18' 4 gauge power cable
- 18' 4 gauge ground cable
- 25' 16 gauge speaker cable
- 25' remote wire
- Mini-ANL fuse holder with 120A and 80A fuses
- Ring, spade, and speaker cable terminals
- Cable ties
SKU: SKU: 45KM654L+MAC65B+RXM-T1+RMWK8
View full details










Product Description
The MAC65B tower pods are machined from 6061 aircraft-grade aluminum and finished in black powder-coat finish which resists chipping, scratching, and fading. Each pod is 100% waterproof and fully marinized, and the speaker terminals are internally wired, routed through the pod and mounting clamp so there are no exposed wires or terminals. A universal aluminum clamp with six rubber inserts fits tower or roll cage tubing from 2 to 2.5 inches in diameter.
The Rockville RXM-T1 amplifier drives the speakers with 370W Dyno-Certified RMS bridged at 4 ohms, or 250W x2 in stereo, backed by a conformal-coated circuit board and stainless exterior screws that hold up to ocean spray. A high-speed MOSFET power supply, adjustable 12dB bass equalizer, and auto-turn-on high level inputs make it simple to wire into a system that has no preamp outputs. A Rockville RMWK4 4-gauge wire kit supplies every cable needed for the install: RCA, power, ground, speaker, and remote wire, plus a fuse holder, fuses, and terminals, so the amplifier wires in from a single box.
Features
Sound And Light On The Water
The 45KM654L pairs a titanium tweeter and 90dB sensitivity with integrated LED lighting for sound and visibility after dark.
Aircraft-Grade Tower Pods
6061 aluminum construction and a black powder-coat finish resist chipping, scratching, and fading on the water.
Amplifier Power To Match
The RXM-T1 pushes 370W Dyno-Certified RMS bridged at 4 ohms, enough headroom to run both speakers at full output.
Marine-Rated Electronics
A conformal-coated PCB and stainless exterior screws protect the amplifier from moisture, salt, and vibration on the water.
Everything Needed To Wire It In
The 4-gauge kit supplies power, ground, RCA, speaker, and remote cable plus fuses and terminals for a complete install.
Technical Specifications
- Product Type Marine LED Speaker, Tower Pod, Amplifier, and Wire Kit Bundle
- Speaker Size 6.5 in
- LED Lighting Integrated
- Speaker RMS Power 65 W per speaker
- Speaker Peak Power 195 W per speaker
- Speaker Impedance 4 Ohms
- Speaker Sensitivity 90 dB
- Tweeter 0.75 in Titanium
- Speaker Frequency Response 35 Hz - 21 kHz
- Mounting Hole Diameter 5.125 in
- Mounting Depth 2.875 in
- Tower Pod Finish Black Aluminum
- Tower Pod Fits Tubing 2 in - 2.5 in diameter
- Tower Pod Mounting Depth 6.7 in
- Tower Pod Total Depth 9.15 in
- Tower Pod Diameter 7.39 in
- Tower Pod Total Height 11 in
- Amplifier Channels 2
- Amplifier RMS Power (Bridged, 4 Ohms) 370 W
- Amplifier Peak Power 1500 W
- Amplifier Frequency Response 10 Hz - 40 kHz
- Amplifier Dimensions 8.6 in x 2 in x 13 in
- Wire Kit Gauge 4 AWG