Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers
Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers
Kicker
Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers
Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers
6-1/2" 2-Way Coaxial Car Speakers, 4-Ohm, 100 W RMS, 600 W Peak Per Pair, Steel Mesh Grilles Included
Free Shipping
Features
- Pair of 6-1/2" two-way coaxial speakers rated 100 W RMS each
- Response down to 40 Hz adds mid-bass weight without a subwoofer
- Zero-protrusion PEI tweeters fit behind most factory grilles
- EVC Extended Voice Coil technology keeps cone movement linear
- Steel mesh grilles included for exposed speaker locations
Couldn't load pickup availability
What's Included in the box
- Two 6-1/2 inch two-way coaxial speakers
- Two steel mesh grilles
SKU: SKU: 46CSC654
View full details









Product Description
A stamped-steel frame supports a rigid polypropylene cone with EVC Extended Voice Coil technology, keeping the coil aligned through its full travel for clean output at higher volume. Response reaches down to 40 Hz, so mid-bass has weight even before you add a subwoofer, and the ribbed, UV-treated poly-foam surround handles the heat and moisture inside a door panel.
The zero-protrusion PEI dome tweeter uses a neodymium magnet for extra output in the top end and mounts flat, so factory grilles reseat without touching the dome. Mounting hole diameter is 4-13/16 inches with 1-11/16 inch bottom mount depth, which clears most factory door cavities and window mechanisms.
Each speaker handles 100 W RMS and 300 W peak with 90 dB sensitivity. They sound better than stock on head unit power alone, and they scale well with a four-channel amplifier if you add one later. Steel mesh grilles are included for rear decks and kick panels where the cone is exposed.
Features
The Easiest Upgrade You Can Make
A 4-13/16 inch mounting hole and 1-11/16 inch bottom mount depth match the most common factory door location, so the swap takes no fabrication.
Mid-Bass You Can Feel
Response down to 40 Hz from a rigid polypropylene cone gives kick drums and bass lines real weight before a subwoofer enters the system.
Clean At Volume
EVC Extended Voice Coil technology keeps the coil aligned through full travel, so 100 W RMS turns into output instead of distortion.
Highs That Clear The Grille
The zero-protrusion PEI dome tweeter with a neodymium magnet adds top-end detail while sitting flat enough for factory grilles to reseat.
Door-Panel Durability
UV-treated ribbed poly-foam surrounds and a stamped-steel frame handle the heat, moisture, and vibration inside a door for the long haul.
Technical Specifications
- Product Type 2-Way Coaxial Car Speakers, Pair
- Speaker Design 2-Way
- Woofer Size 6-1/2 in. (160 mm)
- Tweeter Size 1/2 in. (13 mm)
- Tweeter Dome Material PEI (Polyether Imide)
- Tweeter Magnet Material Neodymium
- Woofer Cone Material Polypropylene
- Woofer Surround Material Polyester Foam
- DC Resistance 3.3 Ohm
- Continuous Power (RMS) 100 W Per Speaker
- Peak Power 300 W Per Speaker, 600 W Per Pair
- Sensitivity 90 dB @ 1W/1m
- Effective Frequency Range 40 Hz - 20 kHz
- Mounting Hole Diameter 4-13/16 in. (123 mm)
- Top Mount Depth 3/8 in. (9 mm)
- Bottom Mount Depth 1-11/16 in. (43 mm)
- Grilles Steel Mesh, Included
- Weight 5 lb
- Dimensions 14.5" L x 7" W x 3.25" H