KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp
KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp
Kicker
KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp
KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp
Mono Class D Car Amplifier, 1200 W RMS At 1 Or 2 Ohms, Bass Boost, Subsonic Filter, Mount Hardware
Free Shipping
Features
- 1,200 W RMS into one bass channel at 1 or 2 ohms
- One-ohm stable design opens up subwoofer wiring options
- KickEQ variable bass boost adds up to 6 dB at 40 Hz
- Accepts 40-volt speaker-level input from a factory radio
- 12" chassis with vertical mounting hardware included
Couldn't load pickup availability
What's Included in the box
- One CXA1200.1 mono Class D amplifier
- Standard and vertical mounting hardware
SKU: SKU: 46CXA12001T
View full details








Product Description
Tuning is handled on the amplifier. A variable 12 dB low-pass crossover sweeps from 50 Hz to 200 Hz, a 24 dB subsonic filter at 25 Hz keeps damaging infrasonic content away from the woofer, and KickEQ variable bass boost adds up to 6 dB at 40 Hz. The optional CXARC remote lets you adjust that boost from the dash while driving instead of reaching into the trunk.
Input flexibility is where CX-Series amps earn their place in factory-radio systems. They accept up to 40 volts of speaker-level input, so a line-out converter is not required when tapping a stock head unit, and FIT+ Fail-safe Integration Technology-PLUS keeps the signal clean. Full-range RCA pass-through outputs let you add another amplifier without splitting signal externally.
A three-second turn-on and turn-off delay keeps thumps out of the speakers. The chassis measures 12 inches long, small enough to mount under a seat or on a rack, and vertical mounting hardware is included for installs where floor space is short. Weight is 7.75 lb.
Features
Power Where You Need It
Rated at 1,200 W RMS into one channel at 2 or 1 ohm, this amplifier has the output to run a pair of subwoofers hard without straining.
Stable At One Ohm
One-ohm stability means dual voice coil subs can be wired for maximum output instead of being limited by the amplifier's minimum load.
Bass Control From The Seat
KickEQ variable boost adds up to 6 dB at 40 Hz, and the optional CXARC remote puts that adjustment on the dash while you are driving.
Works With A Factory Radio
Speaker-level inputs accept up to 40 volts with FIT+ integration technology, so no line-out converter sits between the head unit and the amp.
Fits Tight Installs
A 12-inch chassis with efficient heat sinks and included vertical mounting hardware lets the amp go under a seat or on a wall.
Technical Specifications
- Product Type Mono Class D Car Amplifier
- Power At 4 Ohms 600 W x 1
- Power At 2 Ohms 1200 W x 1
- Power At 1 Ohm 1200 W x 1 +/-10%
- Frequency Response 25 - 200 Hz
- Input Sensitivity Low Level 250mV-10V, High Level 1V-40V
- Signal To Noise Ratio 95 dB
- Active Crossover Variable Low-Pass 50 Hz - 200 Hz, 12 dB/Octave
- Subsonic Filter 25 Hz, 24 dB/Octave
- KickEQ Bass Boost Variable 0-6 dB At 40 Hz
- Remote Bass Control CXARC Capable, Sold Separately
- Chassis Length 12 in.
- Weight 7.75 lb
- Dimensions 15.75" L x 9" W x 4" H