Skip to product information
1 of 9

Kicker

KICKER 46CXA4001T CXA400.1 400 Watt RMS Mono Class D Car Audio Amplifier Amp

KICKER 46CXA4001T CXA400.1 400 Watt RMS Mono Class D Car Audio Amplifier Amp

Mono Class D Car Amplifier, 400 W RMS At 1 Ohm, Bass Boost, Subsonic Filter, Vertical Mount Hardware

Free Shipping

Regular price $199.99
Sale price $199.99 Regular price $219.99
Save 9%
Shipping calculated at checkout.
Features
    • 400 W RMS at 1 ohm, 300 W at 2 ohms, 150 W at 4 ohms
    • One-ohm stable design suits dual voice coil subwoofers
    • Compact 8-1/8" chassis fits under a seat or behind a panel
    • KickEQ variable bass boost adds up to 6 dB at 40 Hz
    • Accepts 40-volt speaker-level input from a factory radio
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • One CXA400.1 mono Class D amplifier
    • Standard and vertical mounting hardware

SKU: SKU: 46CXA4001T

View full details

Product Description

The CXA400.1 is a compact mono Class D amplifier rated at 400 W RMS into 1 ohm, 300 W into 2 ohms, and 150 W into 4 ohms. It is sized for a single 10 or 12-inch subwoofer or a loaded enclosure, and its 8-1/8 inch chassis fits where a larger amplifier will not.

One-ohm stability is the practical advantage here. A dual voice coil subwoofer can be wired for its lowest load and take the amplifier's full output, rather than leaving power on the table because the amp bottoms out at 2 ohms.

Tuning is handled on board: a variable 12 dB low-pass crossover from 50 Hz to 200 Hz, a 24 dB subsonic filter at 25 Hz, and KickEQ variable bass boost of up to 6 dB at 40 Hz. The optional CXARC remote moves that boost control to the dash. Full-range RCA pass-through outputs let you add a second amplifier for door speakers later without splitting signal externally.

Speaker-level inputs accept up to 40 volts, so a factory head unit with no RCA outputs connects directly and a line-out converter stays out of the signal path. FIT+ Fail-safe Integration Technology-PLUS keeps that connection clean. A three-second turn-on and turn-off delay prevents speaker thumps, and both standard and vertical mounting hardware are included. Weight is 5 lb.

Features

    • Right-Sized For One Sub

      With 400 W RMS at 1 ohm, this amplifier matches a single 10 or 12-inch subwoofer or a loaded enclosure without oversizing the electrical system.

    • Full Output From A DVC Sub

      One-ohm stability lets a dual voice coil subwoofer be wired to its lowest load, so none of the amplifier's rated power goes unused.

    • Hides Almost Anywhere

      An 8-1/8 inch chassis with efficient heat sinks and both standard and vertical mounting hardware fits under a seat or on a side panel.

    • Direct Factory Hookup

      Speaker-level inputs accepting up to 40 volts with FIT+ technology connect straight to a stock radio with no line-out converter.

    • Tune It Once, Adjust It Daily

      A 12 dB low-pass, 24 dB subsonic filter, and KickEQ boost set the passband, and the optional CXARC remote adjusts bass from the dash.

Technical Specifications

  • Product Type Mono Class D Car Amplifier
  • Power At 4 Ohms 150 W x 1
  • Power At 2 Ohms 300 W x 1
  • Power At 1 Ohm 400 W x 1
  • Frequency Response 25 - 200 Hz +0/-1 dB
  • Input Sensitivity Low Level 250mV-10V, High Level 1V-40V
  • Signal To Noise Ratio Greater Than 95 dB, A-Weighted
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov