KICKER 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps
Kicker
KICKER 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps
KICKER 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps
Remote Bass Level Controller For KICKER CX, CXA, And PXA Amplifiers, Surface Mount, Screws Included
Features
- Adjusts subwoofer level from the driver's seat on a knob
- Works with KICKER CX, CXA, DX, and PX amps with a remote bass jack
- Controls KickEQ variable bass boost of up to 6 dB at 40 Hz
- Surface mount installation with screws included
- Compact 4.75" x 3.5" x 1.25" housing fits most mounting spots
Couldn't load pickup availability
What's Included in the box
- One CXARC remote bass controller
- Mounting screws
SKU: SKU: 46CXARCT
View full details






Product Description
The reason to add one is practical. Subwoofer level that sounds right on a quiet street is too much on a highway and not enough with the windows down. Rather than setting a compromise gain at install and living with it, the CXARC lets you adjust bass level as conditions change, without pulling over or reaching into the trunk.
Installation is surface mount with the included screws, so it can go on the side of a center console, under the dash, or on a bracket near the shifter. The housing is compact at 4.75 by 3.5 by 1.25 inches, and the whole unit weighs 0.3 lb, so mounting options are wide open.
On amplifiers with KickEQ, the control adjusts the variable bass boost of up to 6 dB at 40 Hz. Connect it to the amplifier's remote bass jack and the system is ready. It is the accessory most people add after the fact, and the one most wish they had wired in during the original install.
Features
Bass Level On Demand
A knob within reach lets you add low end for one track and pull it back for the next, instead of living with one compromise setting.
Wide Amplifier Compatibility
Any KICKER CX, CXA, DX, or PX amplifier with a remote bass jack accepts the controller, including the CXA mono and multichannel models.
Mounts Where You Reach
Surface mount installation with included screws puts the control on a console side, under the dash, or on a bracket near the shifter.
Small Enough To Hide
At 4.75 by 3.5 by 1.25 inches and 0.3 lb, the housing tucks into spots a larger control panel would never fit.
Direct KickEQ Control
On amplifiers with KickEQ, the knob adjusts up to 6 dB of variable boost at 40 Hz from the seat rather than at the amplifier.
Technical Specifications
- Product Type Remote Bass Controller
- Compatibility KICKER CX, CXA, DX, And PX Amplifiers With A Remote Bass Jack
- Installation Surface Mount, Screws Included
- Weight 0.3 lb
- Dimensions 4.75" L x 3.5" W x 1.25" H