Skip to product information
1 of 2

Kicker

KICKER 46KI44 12 ft 4-Channel RCA Cable 4 Meter

KICKER 46KI44 12 ft 4-Channel RCA Cable 4 Meter

Four-Channel RCA Interconnect Cable, 4m (13 ft 10 in), Split-Pin Ends, Silver-Tinned OFC Wire
Regular price $24.95
Sale price $24.95 Regular price $37.99
Save 34%
Shipping calculated at checkout.
Features
    • Four-Channel K-Series interconnect, 4 meters (13 ft 10 in) long
    • Silver-tinned oxygen-free copper conductors for clean signal transfer
    • Split-pin RCA ends hold steady contact inside the jack
    • K-Grip dual-mold connectors give a firm hold during installation
    • Ultra-slim line union routes behind trim panels without snagging
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • 1 x Kicker 46KI44 four-channel RCA interconnect cable, 4 meters, blue

SKU: SKU: 46KI44

View full details

Product Description

The Kicker 46KI44 is a four-channel K-Series interconnect that runs 4 meters, or 13 ft 10 in, between the head unit and the amplifier. Four channels in one jacket handle front and rear speaker outputs on a single run, covering a dash-to-trunk install in most sedans. Signal quality starts with silver-tinned oxygen-free copper conductors and split-pin RCA ends. The split-pin design keeps steady contact pressure inside the jack, which matters in a vehicle that vibrates every day, and clean contact means a lower noise floor and tighter bass response at the amplifier input. K-Grip dual-mold connectors use a shaped body that gives your fingers something to hold, so each plug seats fully even when the amplifier is mounted somewhere you cannot see. The line union between channels is ultra-slim, so the cable slides under sill plates, along kick panels, and behind seat rails without hanging up on brackets and clips. Blue jacketing makes the run easy to identify later when you are tracing wiring behind a panel or adding a second amplifier. It suits a four-channel amplifier or a pair of two-channel amplifiers fed from one head unit. Full-length OFC construction, rather than copper-clad aluminum, keeps resistance low across the entire run, which is what protects low-level signal on the longer lengths in the K-Series line.

Features

    • Sized For The Run

      At 4 meters, or 13 feet 10 inches, four channels in one jacket cover front and rear amplifier inputs on a dash-to-trunk run in most sedans.

    • Quiet Signal Path

      Silver-tinned oxygen-free copper carries the preamp signal with low resistance, keeping the noise floor down and bass detail intact by the time it reaches the amplifier.

    • Contact That Holds

      Split-pin RCA ends flex against the inside of each jack, maintaining contact pressure through the constant vibration a vehicle sees on every trip.

    • Grip While You Install

      K-Grip dual-mold connectors use a shaped, textured body that is easy to hold, so plugs seat fully even on an amplifier you are reaching for blind.

    • Routes Through Tight Spots

      The ultra-slim line union between channels slides under sill plates and behind kick panels instead of catching on brackets, clips, and seat rails.

Technical Specifications

  • Product Type 4-Channel RCA Interconnect Cable
  • Channels 4
  • Length 4 m (13 ft 10 in)
  • Conductor Silver-Tinned Oxygen-Free Copper
  • Connector Type Split-Pin RCA With K-Grip Dual-Mold Body
  • Color Blue
  • Weight 0.55 lb
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov