KICKER 47KRC55 KRC55 Digital LCD IP67 Remote Control for KMC5/KMC100 Receivers
Kicker
KICKER 47KRC55 KRC55 Digital LCD IP67 Remote Control for KMC5/KMC100 Receivers
KICKER 47KRC55 KRC55 Digital LCD IP67 Remote Control for KMC5/KMC100 Receivers
IP67 Digital Remote Control With 2.5" Color LCD For KMC5 And KMC100 Receivers, Trim Ring Included
Free Shipping
Features
- 2.5" full-color LCD shows source, track, and settings at a glance
- Controls most KMC5 Media Center and KMC100 functions
- IP67 rating takes dust and temporary immersion
- 2" mount hole with only 11/16" of protrusion
- Removable snap-on trim ring included
Couldn't load pickup availability
What's Included in the box
- One KRC55 digital remote control
- Snap-on trim ring (removable)
SKU: SKU: 47KRC55
View full details



Product Description
An IP67 rating means the KRC55 takes dust and temporary immersion, which is what a helm or dash control needs on a boat, a side-by-side, or any open cab. The face measures 3 by 4 inches and protrudes 11/16 of an inch from the mounting surface, so it sits close to flush rather than standing off the panel.
Installation needs a 2-inch mount hole, and the removable snap-on trim ring finishes the edge. Leave the ring on for a framed look or pull it off for a cleaner face against the panel.
Two accessories change where you can put it. The KRCEXT25 25-foot extension cable, sold separately, moves the remote well away from the receiver. The KRCY1 Y-adapter splitter, also sold separately, supports multiple KRC55 remotes on one system, so the helm and the stern can both control the same music.
Features
-
See What Is Playing
A 2.5-inch full-color LCD puts source, track, and settings in front of you, so you are not counting button presses to find the right input.
-
Full Control From the Helm
The KRC55 covers most KMC5 functions, which lets you mount the receiver in a dry locker and run the system entirely from the remote.
-
Rated for Water and Dust
An IP67 rating means the remote handles spray, rain, and temporary immersion, the conditions a helm or dash control actually sees on the water.
-
Clean, Shallow Install
A 2-inch mount hole and 11/16 inch of protrusion keep the remote close to flush, and the snap-on trim ring is removable for a plainer face.
-
Put It Where You Need It
The KRCEXT25 extension cable and KRCY1 Y-adapter, both sold separately, let you place the remote far from the receiver or run several remotes at once.
Technical Specifications
- Product Type Marine Remote Control
- Display 2.5 in (6.35 cm) Full-Color LCD
- Water Resistance IP67
- Compatibility KICKER KMC5 Media Center, KMC100 OE Radio
- Mount Hole Diameter 2 in (5.07 cm)
- Protrusion From Mount Surface 11/16 in (1.7 cm)
- Dimensions 3 x 4 in (7.62 x 10.16 cm)