47VK8

The KICKER VK8 is a complete 8 AWG amplifier wiring kit, everything one amplifier install needs in a single box. All power, ground, and turn-on cable is Hyper-Flex oxygen-free copper, which carries current with less loss than copper-clad alternatives and stays pliable in cold weather and tight bends.

You get a 16.5-foot matte red 8 AWG power cable with 6 feet of nylon mesh loom for the engine bay run, a 2.5-foot matte black 8 AWG ground cable, and nickel-plated ring terminals on both ends of the circuit. A 19-foot 18 AWG blue remote wire handles amplifier turn-on, and a 16-foot twisted-pair RCA cable with single injection-molded ends keeps signal clean over the length of the vehicle.

Speaker output is covered by 14 feet of 16 AWG grey and yellow K-Series speaker cable. Circuit protection comes from a zinc, nickel-plated MANL fuse holder and a 60-amp nickel-plated MANL fuse sized to the 8 AWG run, so you are not guessing at a fuse rating.

Insulated crimp connectors, zip ties, and the rest of the small hardware are in the box, which keeps you from making a parts-store run halfway through the job. Every piece is matched to the same gauge, so there is no mixing of cable specs across the install.

Buy the kit alongside a KICKER amplifier and you add an additional year to that amplifier's warranty.