Skip to product information
1 of 22
Bundle & Save

Kicker

CompR 800W 10" Subwoofer + Sealed Enclosure + Krypton-M0 Amplifier + Amp Kit

CompR 800W 10" Subwoofer + Sealed Enclosure + Krypton-M0 Amplifier + Amp Kit

10" 800W Sub in Sealed Box, 350W RMS Amp, 8-Gauge Amp Kit, Install Hardware

Free Shipping

Regular price $293.86
Sale price $293.86 Regular price $623.88
Save 52%
Shipping calculated at checkout.
Features
    • CompR10 subwoofer handles 400W RMS, 800W peak
    • RS10 sealed enclosure sized specifically for this subwoofer
    • KRYPTON-M0 amp delivers 350W RMS (1,400W peak) at 1 ohm
    • Bass remote with real-time clipping indicator
    • Two wiring kits cover both the amp and the sub-to-box connection
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • KICKER 48CWR102 CompR 10" Subwoofer
    • Rockville RS10 Sealed 10" Enclosure
    • Rockville KRYPTON-M0 Mono Amplifier
    • Bass Remote with Clipping Indicator
    • RWK81 8-Gauge Amp Installation Wire Kit
    • Box Installation Kit (Screws, 14-Gauge Wire, Spade Terminals)

SKU: SKU: 48CWR102+RXD-M0+RWK81+RS10+K1

View full details

Product Description

This is the complete bass system: a KICKER 48CWR102 CompR 10-inch subwoofer, a Rockville RS10 sealed enclosure, a KRYPTON-M0 mono amplifier, an RWK81 8-gauge wiring kit, and a box installation kit, all matched to drop into a car or truck without sourcing a single extra part. The CompR10 uses a dual 2-ohm voice coil and Forced Air Cooling to run about 25% cooler than earlier subs, rated for 400W RMS with an 800W peak ceiling. The RS10 enclosure is built in the USA from 3/4-inch MDF, glued, stapled, and silicone-sealed at every seam, with a 0.75 cubic foot net volume tuned specifically for a sealed CompR10 install. Wired to 1 ohm, the KRYPTON-M0 amplifier delivers a Dyno-certified 350W RMS (1,400W peak), well beyond what the sub needs, with a bass remote clipping indicator for setting gain in real time on any track. A digital voltage display and adjustable bass equalizer round out the amp's controls. Two separate hardware kits handle the wiring: the RWK81 supplies 8-gauge power wire and 100% copper RCA cables for the amp, while a dedicated box kit adds mounting screws, 14-gauge speaker wire, and spade terminals to connect the sub to the enclosure. Every part is sized to work together, so there's no mismatched enclosure volume or underpowered amp to troubleshoot later.

Features

    • Every Part Matched to the Next

      The subwoofer, enclosure, and amplifier are sized to work together, so there's no guessing at box volume or amp power after the fact.

    • Set Gain Without Guesswork

      The bass remote's clipping indicator lets you dial gain to the edge of distortion on any song in real time, not just one test track.

    • Built to Handle the Bass

      The RS10 enclosure uses glued, stapled, and silicone-sealed 3/4-inch MDF construction so the box stays rigid under real subwoofer output.

    • Power With Room to Spare

      Wired to 1 ohm, the KRYPTON-M0 outputs a Dyno-certified 350W RMS and 1,400W peak, giving the CompR10 more than enough headroom.

    • Two Kits, Nothing Left to Buy

      One wiring kit connects the amp with copper RCA cables and 8-gauge wire, the other wires the sub into the enclosure with screws and spades.

Technical Specifications

  • Product Type Subwoofer, Enclosure, Amplifier & Wire Kit Bundle
  • Woofer Size 10 in (25cm)
  • Voice Coil Dual 2-Ohm
  • Peak Power Handling 800W
  • Enclosure Type Sealed, 3/4 in USA MDF
  • Net Volume 0.75 cu ft
  • Amplifier Output 350W RMS / 1,400W Peak @ 1 Ohm
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov