48CWRT122
Kicker
48CWRT122
48CWRT122
12" Shallow-Mount Subwoofer, 2-Ohm DVC, 500W RMS, 1000W Peak, 3-3/4 in Mounting Depth
Free Shipping
Features
- 3-3/4 in mounting depth fits under seats and behind rear benches
- Dual 2-ohm voice coils give you wiring options for your amplifier
- Handles 500W RMS and 1000W peak from a shallow frame
- Forced-Air Cooling runs the sub about 20 percent cooler
- Works in a sealed box as small as 0.55 cu ft
Couldn't load pickup availability
What's Included in the box
- One CompRT 12-inch shallow-mount subwoofer
SKU: SKU: 48CWRT122
View full details








Product Description
A UV-resistant cone and surround hold up in open cabs and vehicles that sit in direct sun. A thick magnet structure carries the power handling without adding mounting depth, and the UniPlate back plate and solid pole piece act as a single heat-absorbing unit for thermal management. SoloKon technology joins the cone to a vented back brace, creating one integrated unit that cools the motor and holds distortion down. Forced-Air Cooling runs the sub about 20 percent cooler than the previous generation.
The CompRT 12 works best in a sealed enclosure between 0.55 and 2.0 cu ft, which is a realistic box size for a truck cab, an SUV cargo floor, or a spare-tire well. Specs for a 1.75 to 2.25 cu ft ported box are listed if you would rather trade some control for output. The cutout is 11 in, so the footprint stays reasonable even where the depth is not.
Pair it with an amplifier rated near 500W RMS and you get low end that sounds like a full-size sub from a space most people write off as unusable.
Features
-
Bass Where There Is No Room
Mounting depth of 3-3/4 in clears under-seat spaces and factory sub cavities, so you keep cargo room while adding low end to the system.
-
Small Box, Real Output
A sealed enclosure between 0.55 and 2.0 cu ft is all it needs, which fits a truck cab or a cargo floor without rebuilding the interior.
-
Wiring Options for Your Amp
Dual 2-ohm voice coils wire in series or parallel, letting you match your amplifier's rated impedance and pull its full 500W RMS.
-
Cooler Running Motor
Forced-Air Cooling moves air through the motor structure and runs the sub about 20 percent cooler, so output stays steady on long listening sessions.
-
Made for Rough Duty
The cone and surround are built for weather and vibration, which matters in trucks, open cabs, and anything that spends time off pavement.
Technical Specifications
- Product Type Shallow-Mount Car Subwoofer
- Woofer Size 12 in (30 cm)
- Impedance 2 Ohm DVC
- Recommended Amplifier Power 500 W RMS
- Peak Power 1000 W
- Sensitivity 85.5 dB (1W/1m)
- Sealed Enclosure Volume 0.55 - 2.0 cu ft
- Ported Enclosure Volume 1.75 - 2.25 cu ft
- Mounting Diameter 11 in (27.9 cm)
- Mounting Depth 3-3/4 in (9.6 cm)