Skip to product information
1 of 4

Kicker

Kicker ST4TRK 1.5" Recone Kit Replacement Tweeter Diaphragm For ST4TW 49ST4TRK

Kicker ST4TRK 1.5" Recone Kit Replacement Tweeter Diaphragm For ST4TW 49ST4TRK

Tweeter Recone Kit, 1.5" Aluminum Diaphragm, Field-Replaceable, For A Single ST4TW Bullet Tweeter
Regular price $24.99
Sale price $24.99 Regular price $25.00
Save $0.01
Shipping calculated at checkout.
Features
    • Aluminum diaphragm recone kit for one ST4TW 1.5" bullet tweeter
    • Field replaceable with no glue and no curing time required
    • Restores factory output and voicing to a failed tweeter
    • Keeps a matched tweeter array in service instead of replacing units
    • Practical shelf spare for competition and high-output car systems
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • 1.5" Aluminum Replacement Diaphragm Assembly

SKU: SKU: 49ST4TRK

View full details

Product Description

The ST4TRK is the factory replacement diaphragm assembly for a single ST4TW 1.5-inch bullet tweeter. In high-output systems the diaphragm takes the brunt of the abuse, and when one goes down the rest of the tweeter hardware is usually still perfect. This kit rebuilds that unit with the same 1.5-inch aluminum diaphragm used at the factory, so the repaired tweeter matches the output and voicing of the others in the array. The assembly is field replaceable and requires no glue, which keeps the repair to a bench job measured in minutes rather than a parts order and a curing wait. For installers and competition builders running rows of bullet tweeters, keeping kits on hand means a failed unit never sidelines a vehicle between events. Each kit services one ST4TW tweeter, so buy one per unit. This kit fits the 1.5-inch ST4TW only; the 1-inch ST3TW takes the ST3TRK version.

Features

    • Rebuild Instead Of Replace

      One kit brings a failed ST4TW back to service with the same aluminum diaphragm it shipped with, so the installed tweeter stays where it is.

    • No Glue, No Downtime

      The assembly is field replaceable, so there is no adhesive to apply, no cure time and no delay before the system plays again.

    • Matched Output

      A factory diaphragm keeps the repaired tweeter voiced identically to the rest of the array, so system balance does not shift.

    • Made For Hard Use

      Bullet tweeters in SPL builds run hot and loud, and a stocked kit turns a failure into a short bench job between events.

    • Correct Fitment

      Built specifically for the 1.5-inch ST4TW tweeter, so diaphragm size and voice coil compatibility are already sorted before the kit reaches your bench.

Technical Specifications

  • Product Type Tweeter Recone Kit
  • Compatibility ST4TW 1.5" Bullet Tweeter (One Tweeter Per Kit)
  • Diaphragm Size 1.5" (38 mm)
  • Diaphragm Material Aluminum
  • Installation Field Replaceable, No Glue Required
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov