Kicker 50CVX102 COMPVX 10" Car Audio Subwoofer DVC 2 Ohm Sub CVX102

The CVX102 is a 10-inch CompVX subwoofer for builds that want deep output without a huge box. It borrows the design work from the square Solo-Baric L7 line and applies it to a round frame, so it fits standard cutouts while keeping the performance features that make those subs hit. The one-piece SoloKon cone with vented back bracing behaves as a single rigid unit, which keeps distortion down at full excursion and moves heat off the motor at the same time. A ribbed Santoprene surround with signature double blue stitching controls the thick polypropylene cone at maximum travel. The basket is cast aluminum with perimeter venting that circulates air through the motor, and a UniPlate extended pole piece and backplate pull heat out of the voice coil, so the sub keeps working when you run hundreds of watts through it for hours. Spring-loaded satin nickel terminals accept wire up to 10 gauge. The dual 2-ohm voice coils give you wiring options: parallel for 1 ohm or series for 4 ohms, so you can match the amplifier you already own. Recommended power is 600 watts RMS with 1200 watts peak, and response reaches down to 24 Hz. A 10-inch cone in a 1.25 to 1.75 cubic foot vented box hits hard in a hatchback or small trunk, and the 0.8 cubic foot sealed minimum means it also works in a tight custom enclosure. Mounting depth is 5-15/16 inches behind a 9-3/16-inch cutout.