Skip to product information
1 of 11

Kicker

2 Kicker 51KSC2704 KSC270 2.75" Mid/Tweeters Fits GM/Chrysler/Subaru/Jeep/Toyota

2 Kicker 51KSC2704 KSC270 2.75" Mid/Tweeters Fits GM/Chrysler/Subaru/Jeep/Toyota

2-3/4" Mid-Range Tweeter Pair, 50W RMS, Three Vehicle-Specific Bracket Sets, Capacitors, Wire Harnesses

Free Shipping

Regular price $59.99
Sale price $59.99 Regular price $69.99
Save 14%
Shipping calculated at checkout.
Features
    • 2-3/4" mid-range tweeters rated 15 to 50W RMS
    • Three bracket sets fit GM, Chrysler, Jeep, Subaru and Toyota openings
    • UV-treated paper cones and rubber surrounds handle dash-top sunlight
    • Capacitors included to keep low frequencies out of the small cones
    • Frequency response of 300Hz to 20kHz covers vocals and the top end
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • (2) 2.75" KSC Mid-Range Tweeters
    • (2) Capacitors
    • (2) Wire Harnesses
    • (4) Butt Connectors
    • (4) Mounting Screws
    • (4) Speed Nuts
    • (2) Black Adhesive Strips For Securing Flange
    • (2) GM/Chrysler Flanges
    • (2) GM/Chrysler Retainers
    • (2) Jeep Flanges
    • (2) Jeep Retainers
    • (2) Subaru/Toyota Flanges
    • (2) Subaru/Toyota Retainers

SKU: SKU: 51KSC2704

View full details

Product Description

The KICKER KSC270 is a pair of 2-3/4-inch mid-range tweeters made to fill the small factory speaker locations that most aftermarket speakers cannot reach: dash pods, sail panels, upper door corners and rear pillars. Rather than force a universal frame into a hole it was never made for, the KSC270 ships with three bracket sets cut for GM, Chrysler, Jeep, Subaru and Toyota factory openings.

Each driver covers 300Hz to 20kHz, so it handles vocals and upper midrange along with the top end. That fills the gap left when a factory dash speaker fails and the rest of the system suddenly sounds like it is coming from the floor. Rated power is 15 to 50W RMS at 85 dB sensitivity, which matches typical factory head unit output and works fine on a small amplifier channel.

Build details matter in these locations. UV-treated paper cones and rubber surrounds hold up to the sunlight that hits a dash pod all day. Top mount depth is 1-5/8 inches with a 3-1/16-inch mounting hole, so the pair sits behind factory grilles without pushing on trim. Included capacitors act as a high-pass, keeping low frequencies out of the small cones.

Wire harnesses, butt connectors, speed nuts, screws and adhesive for the flange all come in the box, so the install stays plug-in on supported vehicles. Use them as a direct replacement for failed factory dash or pillar speakers, or as the upper half of a front stage with larger woofers in the doors.

Features

    • Three Brackets, Five Brands

      GM, Chrysler, Jeep, Subaru and Toyota flange and retainer sets come in the box, so the pair uses factory holes instead of custom fabrication.

    • Fills The Missing Midrange

      Response from 300Hz to 20kHz covers vocals and upper midrange, restoring the part of the stage that disappears when a dash speaker fails.

    • Made For Sun-Exposed Spots

      UV-treated paper cones and rubber surrounds resist the heat and light that destroy factory dash speakers over a few summers.

    • Protection Included

      Supplied capacitors act as a high-pass filter, keeping bass energy away from the small cones so they stay clean at volume.

    • Hides Behind Factory Trim

      A 1-5/8-inch top mount depth and 3-1/16-inch mounting hole keep the drivers behind original grilles with no trim modification.

Technical Specifications

  • Product Type Mid-Range Car Speakers (Pair)
  • Speaker Design Midrange
  • Midrange 2-3/4 in, 70 mm
  • Rated Impedance 4 Ohms
  • Recommended Amplifier Power 15-50W RMS
  • Sensitivity (1W, 1m) 85 dB
  • Frequency Response 300Hz-20kHz
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov