Kicker 51KXMA15001 1500 Watt Marine Mono Amplifier Sub Amp Class D KXMA1500.1
Kicker
Kicker 51KXMA15001 1500 Watt Marine Mono Amplifier Sub Amp Class D KXMA1500.1
Kicker 51KXMA15001 1500 Watt Marine Mono Amplifier Sub Amp Class D KXMA1500.1
Class D Marine Mono Amplifier, 1,500W At 1 Or 2 Ohms, Conformal-Coated Board, KMBLC Remote Included
Free Shipping
Features
- Class-D mono amplifier rated 1,500W at both 1 and 2 ohms
- Conformal-coated circuit board resists moisture and salt air
- ABYC and NMMA-compliant marine power connections
- 316L stainless-steel mounting hardware included
- KMBLC remote level control included for helm-mounted bass adjustment
Couldn't load pickup availability
What's Included in the box
- (1) KXMA1500.1 Marine Mono Amplifier
- (1) KMBLC Remote Level Control
- 316L Stainless-Steel Mounting Hardware
SKU: SKU: 51KXMA15001
View full details










Product Description
Marine hardware is not a label here. The circuit board is conformal-coated against moisture and salt air, the power connections meet ABYC and NMMA requirements, and 316L stainless-steel mounting hardware comes in the box. Those three things are what separate an amplifier that survives a season on open water from one that corrodes at the terminals.
Tuning is thorough. A variable 40 to 160Hz low-pass crossover at 24dB/octave and a variable 10 to 80Hz subsonic filter let you match the amplifier to a sealed or free-air enclosure. KickEQ+ parametric bass boost adds 0 to 6dB at 40Hz. The included KMBLC remote level control mounts at the helm so bass can be adjusted with passengers aboard, and full-range RCA pass-through outputs let you add a second amplifier without splitters.
Dynamic power reaches 2,500W and frequency response runs 10Hz to 160Hz. Input sensitivity covers low-level 125mV to 5V and high-level 250mV to 10V, so a factory marine source unit or an aftermarket head unit connects directly. Run it on a wakeboard boat tower system, a pontoon with under-seat subwoofers, or a center console that needs bass over engine and wind noise.
Features
-
Full Power At Either Impedance
The amplifier makes 1,500W at 1 ohm and 1,500W at 2 ohms, so subwoofer wiring can follow the boat layout instead of the amplifier.
-
Built For Salt Air
A conformal-coated circuit board, ABYC/NMMA-compliant connections and 316L stainless hardware hold up to spray, humidity and marine corrosion.
-
Bass Control At The Helm
The included KMBLC remote mounts at the dash so the operator adjusts subwoofer level while under way, without leaving the wheel.
-
Dial In The Enclosure
A variable 24dB low-pass from 40 to 160Hz and a 10 to 80Hz subsonic filter match the amplifier to sealed or free-air marine boxes.
-
Room To Expand
Full-range RCA pass-through outputs feed a second amplifier for tower or cockpit speakers with no splitters or extra line drivers.
Technical Specifications
- Product Type Class D Marine Mono Subwoofer Amplifier
- Power, 1 Ohm Mono (14.4V) 1,500W x 1 +/-10%
- Power, 2 Ohm Mono (14.4V) 1,500W x 1
- Power, 4 Ohm Mono (14.4V) 750W x 1
- Dynamic Power 2,500W
- Frequency Response 10Hz-160Hz
- Signal-To-Noise Ratio (A-weighted, rated power) -95 dB
- Input Sensitivity Low level 125mV-5V; high level 250mV-10V
- Low-Pass Crossover Variable 40-160Hz, 24 dB/octave
- Subsonic Filter Variable 10-80Hz, 24 dB/octave
- KickEQ+ Bass Boost Variable 0-6dB at 40Hz
- Remote Level Control KMBLC included
- Hardware 316L stainless steel
- Dimensions 11-3/16 in L x 7-7/16 in W x 2-1/8 in H (28.4 x 18.9 x 5.5 cm)