KICKER 51MWF104 10" 400 Watt RMS Marine Boat Free Air Subwoofer 4-Ohm Sub
Kicker
KICKER 51MWF104 10" 400 Watt RMS Marine Boat Free Air Subwoofer 4-Ohm Sub
KICKER 51MWF104 10" 400 Watt RMS Marine Boat Free Air Subwoofer 4-Ohm Sub
10" Free-Air Marine Subwoofer, 400W RMS At 4-Ohm, No Enclosure Needed, RGBW LED Lighting, Charcoal Grille
Free Shipping
Features
- 10-inch 4-Ohm free-air marine subwoofer rated 200-400W RMS, 800W peak
- Mounts to a baffle with no enclosure required, saving storage space
- Polypropylene cone with co-molded TPE surround resists water and sun
- Passes ASTM B117 salt/fog and ASTM G154 accelerated UV testing
- Built-in RGBW LED lighting with a charcoal grille included
Couldn't load pickup availability
What's Included in the box
- (1) MWF104 10" Free-Air Marine Subwoofer
- (1) Charcoal Grille
SKU: SKU: 51MWF104
View full details








Product Description
The cone is polypropylene co-molded to a TPE surround, a pairing that stays stiff under load while resisting water, sun, and temperature swings. A polycarbonate bridge seated on a ribbed silicone gasket forms a vibration-resistant seal at the mounting surface, which matters even more in a free-air install where the baffle itself does the work of an enclosure. The glass-infused nylon basket takes heat and abuse better than stamped steel. KICKER Real Marine construction adds marine-compliant terminals and splash-and-spray resistance, and the sub meets or exceeds ASTM B117 200-hour salt/fog and ASTM G154 400-hour accelerated UV testing.
Mounting takes a 9-1/16-inch hole with 5-3/16 inches of depth and an 11-inch outer diameter. Use a solid, well-braced baffle with a large sealed volume behind it; a thin panel may need a backing plate to stay rigid under load.
RGBW LED lighting is built in for night use. A charcoal grille is included and the MWGW white grille is sold separately. Common placements include bow storage bulkheads, helm panels, pontoon side walls, and under-seat baffles in side-by-sides.
Features
-
Bass Without Giving Up Storage
Free-air mounting uses the sealed space behind a baffle rather than a box, so a bow locker or console keeps its cargo room and still gets low end.
-
Real Output From A Panel Mount
200-400W RMS handling and 20-500Hz response mean this free-air sub adds usable bottom end, not just a token low-frequency assist.
-
Weather Where It Matters
A polypropylene cone co-molded to a TPE surround stays stiff under power while resisting water, salt, and UV that destroy paper cones outdoors.
-
Sealed Against Vibration
A polycarbonate bridge on a ribbed silicone gasket creates a tight seal at the mounting surface, which matters most when the baffle acts as the enclosure.
-
Tested, Not Just Labeled
The sub meets or exceeds ASTM B117 200-hour salt/fog and ASTM G154 400-hour accelerated UV standards, so marine claims come with real test criteria behind them.
Technical Specifications
- Product Type 10" Free-Air Marine Subwoofer
- Woofer 10" (25 cm)
- Rated Impedance 4 Ohms
- Recommended Amplifier Power 200-400W RMS
- Peak Power Handling 800W
- Frequency Response 20-500Hz
- Sensitivity 84dB (1W, 1m)
- Mounting Hole Diameter 9-1/16" (23.1 cm)
- Mounting Depth 5-3/16" (13.2 cm)
- Grille Charcoal included (MWGW white grille sold separately)
- Outer Diameter 11" (28 cm)