CR3.5 Monitor Pair with PRO-M50 Headphones, RCM03 Mic and RHT8B Stands
MACKIE
CR3.5 Monitor Pair with PRO-M50 Headphones, RCM03 Mic and RHT8B Stands
CR3.5 Monitor Pair with PRO-M50 Headphones, RCM03 Mic and RHT8B Stands
3.5-Inch Powered Monitors, Headphones, Condenser Mic, Desktop Stand Pair
Free Shipping
Features
- Pair of 3.5-inch powered monitors with tone control and a location switch
- TRS, RCA, and 3.5 mm inputs plus a built-in headphone output
- PRO-M50 headphones include 40 mm drivers, a coiled cable, case, and extra pad
- RCM03 mic includes two cables, a metal shock mount, and foam cap
- Pair of RHT8B stands supports the monitors in a desktop setup
Couldn't load pickup availability
What's Included in the box
- (1 pair) CR3.5 3.5-inch powered studio monitors
- (1) PRO-M50 closed-back studio headphones
- (1) 51-inch detachable coiled 100% oxygen-free copper cable
- (1 pair) interchangeable leather and soft suede ear cushions
- (1) extra ear pad
- (1) hard leather carrying case
- (1) gold-plated 1/4-inch adapter
- (1) RCM03 condenser microphone
- (1) 10 ft 3.5 mm jack-to-XLR cable
- (1) 10 ft XLR-to-XLR cable
- (1) metal shock mount
- (1) metal anti-wind foam cap
- (1 pair) black RHT8B desktop speaker stands
SKU: SKU: CR3.5+PRO-M50+RCM03+RHT8B
View full details































Product Description
Features
Shape The Monitor Response
The 3.5-inch powered monitors pair tone control with desktop and bookshelf modes, letting you adjust their response for mixing, gaming, music, or listening across the room.
Connect Everyday Audio Gear
TRS, RCA, and 3.5 mm inputs accept audio interfaces, mixers, record players, and other playback devices, while the front headphone output switches to private listening.
Monitor In Private
Closed-back PRO-M50 headphones use 40 mm drivers and a flat frequency curve, helping you monitor recordings with less outside sound and minimal bleed during editing.
Record Into Your Setup
The 16 mm RCM03 condenser mic has a cardioid pattern, plus 10 ft 3.5 mm-to-XLR and XLR-to-XLR cables for computer or mixer connections.
Set Up The Monitors
A pair of RHT8B stands provides dedicated support for the CR3.5 monitors, keeping monitor support separate from other desk gear.
Technical Specifications
- Product Type Studio monitor, headphone, condenser microphone, and stand bundle
- Monitor Configuration 1 pair of 3.5" powered studio monitors
- Monitor Woofer 3.5" woven woofer
- Monitor Tweeter Silk dome tweeter with protective grille
- Monitor Controls Sound-shaping tone control; desktop and bookshelf location switch
- Monitor Inputs TRS, RCA, and 3.5 mm
- Monitor Output Built-in headphone output
- Headphone Style Closed-Back
- Headphone Design Circumaural
- Headphone Transducer Type Dynamic
- Headphone Driver 40MM
- Headphone Sensitivity 97±3dB
- Headphone Impedance 32ohm
- Headphone Frequency Response 10Hz - 25KHz
- Headphone Max. Power 600MW
- Headphone Rating Power 260MW
- Headphone Cable 51" detachable coiled cable (158" fully extended), 100% Oxygen Free Copper
- Microphone Polar Pattern Unidirectional Cardioid
- Microphone Capsule Permanently Polarized Single Sided "Electret" Style Capsule
- Microphone Diaphragm 16mm
- Microphone Power Requirements 48V DC Phantom Power
- Microphone Sensitivity -29dB±2dB (0dB=1V/Pa at 1kHz)
- Microphone Output Impedance 200O±30% (at 1kHz)
- Microphone Standard Operating Voltage 3V
- Microphone Operating Voltage Range 1.5V-10V
- Microphone Current Consumption ≤ 500uA
- Microphone Voltage Deduction Characteristic Within 3dB at 2V
- Microphone S/N Ratio 74 dB
- Microphone Frequency Response 30Hz - 20 KHz
- Microphone Fixed Crossover Filter Cutoff Frequency 40Hz---16 KHz
- Microphone Load Impedance ≥ 1000 Ohms
- Microphone Equivalent Noise Level ≤ 18dBA (IEC 581-5)
- Microphone Max. Input SPL 126dB (THD=1.0% at 1kHZ)
- Microphone Electrical Current ≥ 4.8mA
- Microphone Material Steel Basket + Aluminum Body
- Microphone PCB Layout Surface Mount
- Weight CR3.5 monitors: 8.2 lb / 3.7 kg; PRO-M50 headphones: 290g (with cable); RCM03 microphone body: 380 g (0.84 lb)
- Dimensions CR3.5 monitors: 8.1 x 5.5 x 7.1 in / 206 x 140 x 180 mm (H x W x D); RCM03 microphone: 51 mm max diameter (2 in), 215 mm length (8.46 in)