2-Person Podcast Recording Kit with ProFX12v3 Mixer and Boom Arms

This 2-person podcast kit builds a full multi-host recording setup around a Mackie ProFX12v3 12-channel mixer, which pairs 7 Onyx mic preamps at up to 60dB of gain with 24 built-in digital effects and a 2x4 USB interface that records at 24-bit/192kHz. Each of the 2 hosts gets an aluminum-bodied RCM03 condenser microphone with a cardioid pattern that keeps side and rear noise out of the take, wired with both a 3.5mm cable for direct computer use and an XLR cable for the mixer, a pair of PRO-M50 closed-back headphones with 40mm Neodymium drivers and a detachable coiled cable, and a DMS40 boom arm that swings out to 40" of reach and clamps to a desk up to 2" thick. A shared RHPA4 headphone amplifier splits the monitor mix across up to 8 headphones with its own volume control for every channel, so no two hosts have to share a level. A 6-foot RCTR106B TRS cable carries the finished mix out of the 12-channel ProFX12v3 mixer to a recorder, powered speakers, or a streaming setup. Because every mic, headphone, and stand routes through that single mixer, a host can record a clean multi-track podcast, run a panel interview, or produce a live show without sourcing extra gear or mismatched cables from other brands. The kit scales with the show: run all 2 mics for a full roundtable, or bring the count down for a smaller episode, and the ProFX12v3 still handles the mix, the effects, and the recording on its own.