1
/
of
7
MB QUART
FKB146
FKB146
4x6" 2-Way Coaxial Car Speakers, 180W Peak Power, 55 Hz-20 kHz, 1" Aluminum Dome Tweeters, Sold As A Pair
Regular price
$28.95
Sale price
$28.95
Regular price
$39.99
Unit price
/
per
Save 27%
Shipping calculated at checkout.
Features
- Pair of 4x6" two-way coaxial speakers rated 45 W RMS and 90 W peak each
- 1" aluminum dome tweeters carry response to 20 kHz
- Polypropylene cones and butyl rubber surrounds for quick, weighted midrange
- 6 kHz internal crossover keeps midrange to tweeter handoff even
- Factory 4x6 cutout of 5.5" x 3.46" with 3" mounting depth
Couldn't load pickup availability
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
What's Included in the box
- Two MB Quart FKB146 4x6" coaxial speakers
SKU: SKU: FKB146
View full details






Product Description
The MB Quart FKB146 is a pair of 4x6-inch two-way coaxial speakers cut for factory 4x6 locations, most often front doors and dash corners in domestic cars and trucks. Each speaker takes 45 W RMS and 90 W peak, so the pair handles 90 W RMS and 180 W peak, a range that fits both a stock head unit and a compact four-channel amplifier. Response runs 55 Hz to 20 kHz with a 1-inch aluminum dome tweeter at the cone center and a 6 kHz internal crossover on a 12 dB slope, so the shift from midrange to treble stays even instead of stepping. Thermal-formed polypropylene cones keep mass low for quick midrange, while butyl rubber surrounds add mid-bass weight and hold their properties through heat, cold, and humidity. A pure copper voice coil on a Kapton former generates strong magnetic force and pulls heat out of the motor, backed by an over-coil cooling path through the natural fiber spider. High-temp adhesive at the cone and surround joint keeps them bonded at high output, and heavy gauge stamped steel frames stop flex. The textured ABS gasket seals the frame to the panel to cut air leaks and rattles. Sensitivity of 88 dB keeps volume up on limited power. Cutout is 5.5 x 3.46 inches with a 5.94 x 3.84-inch outside dimension and 3-inch mounting depth. Wire with spade connectors or solder direct.
Features
-
Direct Factory Size Upgrade
Cutout of 5.5 x 3.46 inches matches OEM 4x6 openings, so you replace worn factory speakers without cutting or fabricating brackets.
-
Treble That Cuts Through
1-inch aluminum dome tweeters reach 20 kHz and stay composed at volume, recovering the detail aging paper speakers lose.
-
Works On Any Power Level
45 W RMS per speaker and 88 dB sensitivity mean strong output from a stock radio and headroom for an amplifier.
-
Weather Resistant Build
Butyl rubber surrounds and high-temp cone bonding stay intact through summer heat and winter cold inside door panels.
-
Rigid, Rattle-Free Mounting
Stamped steel frames and a textured ABS gasket create a tight seal to the panel, cutting air leaks and buzz.
Technical Specifications
- Product Type 4x6" 2-Way Coaxial Car Speakers (Pair)
- RMS Power Handling 45 W Per Speaker / 90 W Per Pair
- Peak Power Handling 90 W Per Speaker / 180 W Per Pair
- Impedance 4 Ohms
- Frequency Response 55 Hz - 20 kHz
- Sensitivity 88 dB
- Crossover Point 6 kHz
- Crossover Slope 12 dB
- Tweeter 1" Aluminum Dome
- Cone Material Thermal-Formed Polypropylene
- Surround Butyl Rubber
- Voice Coil Pure Copper On Kapton Former
- Frame Progressive-Die Stamped Steel
- Motor Ferrite Magnet
- Mounting Cutout 5.5" x 3.46"
- Outside Dimensions 5.94" x 3.84"
- Mounting Depth 3.0"