Skip to product information
1 of 6

MB QUART

Pair MB QUART FT1-25 50 Watt RMS 1" Car Audio Tweeters + Crossovers

Pair MB QUART FT1-25 50 Watt RMS 1" Car Audio Tweeters + Crossovers

1" Aluminum Dome Car Audio Tweeters, 50W RMS, 150W Peak, External Crossovers And Mounting Hardware, Pair
Regular price $27.90
Sale price $27.90 Regular price $39.99
Save 30%
Shipping calculated at checkout.
Features
    • Pair of 1" aluminum dome tweeters rated 50 W RMS and 150 W peak each
    • Wide 2 kHz to 30 kHz response keeps cymbal and vocal detail intact
    • High 91 dB sensitivity matches efficient midbass drivers without extra power
    • External Butterworth crossovers with a 12 dB per octave slope included
    • Shallow 0.70" depth and 2" diameter fit tight pillar and dash locations
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Two MB Quart FT1-25 1" aluminum dome tweeters
    • Two external passive crossovers
    • Tweeter mounting hardware

SKU: SKU: FT1-25

View full details

Product Description

The MB Quart FT1-25 is a pair of 1-inch aluminum dome tweeters with external passive crossovers, sold as a kit for adding or rebuilding the high frequency side of a system. Use them to convert a set of coaxial midbass drivers into a component layout, replace failed factory tweeters, or place highs on the A-pillar or sail panel where they reach your ears directly. Each tweeter handles 50 W RMS and 150 W peak at 4 ohms, and response covers 2 kHz to 30 kHz, well past the top of the audible range, which keeps cymbals and vocal detail intact. Sensitivity of 91 dB is high, so these keep pace with efficient midbass drivers without needing extra power. The included external crossover uses a Cauer topology Butterworth filter with a 12 dB per octave slope, giving a controlled handoff from midbass to tweeter and protecting the dome from low frequency content it should not see. The crossover housing is compact and hides behind trim during installation. Mounting hardware is included, and the tweeter measures 2 inches for both cutout and outside diameter with a shallow 0.70-inch depth, so surface, flush, and angled mounting are all workable in tight pillar and dash locations. Fitment is universal across vehicles.

Features

    • Put Highs Where You Sit

      A 0.70-inch mounting depth and 2-inch diameter let you place tweeters on the A-pillar or sail panel, aiming detail at your ears.

    • Crossovers Already Handled

      Included external Butterworth filters with a 12 dB per octave slope block damaging low frequencies and blend the tweeters with your midbass.

    • Detail Past The Audible Range

      Response from 2 kHz to 30 kHz keeps cymbals, strings, and vocal texture intact rather than rolling off early like factory tweeters.

    • Loud Without More Power

      91 dB sensitivity and 50 W RMS handling let these keep up with efficient midbass drivers on the same amplifier channel.

    • Universal Fitment, Any Build

      Mounting hardware is included and fitment is universal, so these work as a factory tweeter replacement or a coaxial-to-component upgrade.

Technical Specifications

  • Product Type 1" Aluminum Dome Car Audio Tweeters With Crossovers (Pair)
  • RMS Power Handling 50 W
  • Peak Power Handling 150 W
  • Impedance 4 Ohms
  • Frequency Response 2 kHz - 30 kHz
  • Sensitivity 91 dB
  • Crossover Slope 12 dB Per Octave
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov