Metra BNFD250F 100 Pack Female Insulated 16-14 Ga AWG Wire Spade Terminals

The BNFD250F is a 100-pack of blue nylon female quick disconnect terminals sized for 16-14 gauge wire with a .250 tab. Each terminal crimps onto stripped wire and pushes straight onto a matching male tab, so the joint can be pulled apart by hand later without cutting or re-splicing.

The nylon body is fully insulated, covering the crimp barrel and the wire entry so no bare copper is left exposed once the connection is made. That is what keeps a terminal from shorting against a bracket, a chassis panel, or a neighboring connector in a tight harness run. The blue jacket follows the standard gauge color code, so 16-14 AWG terminals are easy to pick out of a parts drawer or a crowded bench.

Typical jobs include amplifier remote turn-on leads, speaker and accessory wiring, relay and fuse block connections, interior and exterior lighting, and marine or powersports wiring where a serviceable joint is better than a soldered one. Because the connection separates, you can drop a door panel, bench-test an amplifier, or swap a component without rebuilding wiring you already ran.

At 100 pieces per package, a single box covers a full install with plenty left for the next one. Crimp with a proper insulated terminal tool for a tight mechanical and electrical connection, and give each finished terminal a light pull test before you tuck the harness away.