(2) MTX Terminator TN12-04 12" Car Subwoofers
MTX
(2) MTX Terminator TN12-04 12" Car Subwoofers
(2) MTX Terminator TN12-04 12" Car Subwoofers
12" Car Subwoofers, 200W RMS Each, 4 Ohm, Set Of 2
Free Shipping
Features
- Two matched TN12-04 12" subwoofers, 200W RMS each
- 400W peak power handling per sub, 800W peak combined
- 4 ohm impedance for standard amplifier setups
- ALDS suspension geometry for controlled, linear cone travel
- Spider Plateau Venting cools the voice coil under sustained bass
Couldn't load pickup availability
What's Included in the box
- (2) MTX Terminator TN12-04 12" Car Subwoofers
SKU: SKU: (2) TN12-04
View full details









Product Description
Each TN12-04 uses MTX's ALDS suspension geometry, combining a flat progressive spider with an extended pole piece to keep the cone traveling in a controlled, straight, piston-like path even as excursion increases. Spider Plateau Venting targets cool air directly at the voice coil, the part of the subwoofer that generates the most heat under sustained bass, helping the pair avoid the thermal compression that causes volume to fade over long listening sessions. A rubber surround adds long-term durability over the stiffer foam surrounds found on lower-cost subs.
With a 24Hz-160Hz frequency response and a recommended 100-200W RMS per sub, this pair works well in either a sealed 1.25 cubic foot enclosure or a vented 2.0 cubic foot box. The classic MTX cosmetics, including the logo on the dustcap, give the install a finished look that matches the sound.
Features
A Matched Pair, Not A Mismatch
Buying two identical subs at once keeps output even in a dual-sub enclosure, avoiding the uneven bass that comes from mixing subs of different ages.
Controlled Cone Travel At High Power
The ALDS suspension geometry keeps the cone moving in a straight, piston-like path instead of wobbling off-axis as excursion increases.
Cooler Coils, Longer Play Time
Spider Plateau Venting routes cool air directly at the voice coil, delaying the thermal compression that causes bass output to fade during long sessions.
Fits A Standard 4-Ohm Setup
Running at 4 ohms combined, this pair works with common amplifier configurations without needing a specialized low-impedance amp.
Durable Rubber Surround
A rubber surround resists the cracking and stiffening that foam surrounds develop over years of flexing
Technical Specifications
- Product Type Car Subwoofers, Set Of 2
- Subwoofer Size 12 in
- RMS Power Handling 200W Per Sub
- Peak Power Handling 400W Per Sub
- Impedance 4 Ohm
- Recommended Amp Power 100W - 200W RMS
- Frequency Response 24Hz - 160Hz
- Sensitivity 86.4 dB
- Voice Coil 1.50 in
- Mounting Depth 5.44 in
- Cut Out Diameter 11.08 in