Skip to product information
1 of 6

MTX

MTX MUD100.4 400 Watt RMS 4-Channel Amplifier Amp For Polaris RZR/ATV/UTV/Cart

MTX MUD100.4 400 Watt RMS 4-Channel Amplifier Amp For Polaris RZR/ATV/UTV/Cart

4-Channel Class D Powersports Amplifier, 100 W RMS Per Channel at 2 Ohms, IP66 Rated, Wiring Pigtail Included

Free Shipping

Regular price $339.95
Sale price $339.95 Regular price $299.95
Shipping calculated at checkout.
Features
    • Four-channel class D amplifier rated 100 W RMS per channel at 2 ohms
    • Bridges to 200 W RMS x 2 channels at 4 ohms
    • IP66 weather resistant with conformal coated board and covered controls
    • Wiring pigtail keeps power, ground, and signal connections out of the chassis
    • Frequency response of 10 Hz to 32 kHz with THD under 0.2%
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • MUD100.4 4-Channel Amplifier
    • Wiring Pigtail

SKU: SKU: MUD100.4

View full details

Product Description

The MTX MUD100.4 is the most compact amplifier MTX has built, and it still delivers four channels of real power: 50 W RMS per channel at 4 ohms, 100 W RMS per channel at 2 ohms, and 200 W RMS bridged per pair at 4 ohms, with 400 W peak handling. It fits side-by-sides, boats, sand rails, and motorcycles where space is measured in inches.

Full range class D topology delivers strong sound quality with high thermal efficiency, which is how a 6.52" x 5.51" x 1.86" chassis handles four channels without cooking itself. Frequency response runs 10 Hz to 32 kHz with THD under 0.2%, so it stays accurate on door speakers, a sound bar, or a subwoofer.

Everything about the build assumes bad conditions. The unit is IP66 weather resistant, the circuit board is conformal coated, and the control adjustments sit under covers that keep moisture out. A wiring pigtail carries power, ground, and signal connections away from the amplifier body, so you never open a connection point next to the electronics. Mud, dust, and water stay outside where they belong.

Fixed high-pass and low-pass crossovers at 80 Hz, 12 dB per octave, let you assign channels to full-range speakers or to a subwoofer without adding an external processor. Maximum sensitivity is 200 mV with a 5V maximum input signal, so it pairs with powersports head units like the MTX AWMC3 or with a factory source.

Features

    • Four Channels, Tiny Footprint

      A 6.52" x 5.51" x 1.86" chassis delivers 100 W RMS per channel at 2 ohms, fitting behind a dash or under a seat on any UTV.

    • Sealed Against the Trail

      IP66 construction, a conformal coated circuit board, and covered controls keep mud, dust, and water away from the electronics.

    • Connections Away From the Amp

      The included pigtail carries power, ground, and signal, so wiring joints sit where you can protect them instead of at the amplifier body.

    • Accurate at Any Volume

      Response from 10 Hz to 32 kHz with THD under 0.2% keeps music clean, which is what separates loud from actually good sounding.

    • Speakers and Subwoofers Together

      Fixed 80 Hz high-pass and low-pass crossovers at 12 dB per octave let you split channels between full-range speakers and a subwoofer.

Technical Specifications

  • Product Type 4-Channel Class D Powersports Amplifier
  • RMS Power @ 4 Ohms 50 W x 4 Channels
  • RMS Power @ 2 Ohms 100 W x 4 Channels
  • RMS Power Bridged @ 4 Ohms 200 W x 2 Channels
  • Peak Power Handling 400 W
  • Topology Full Range Class D
  • Frequency Response 10Hz - 32kHz
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov