(2) Eris Pro 4 Studio Monitors + R-TRACK 2x2 USB Interface + Cables

This bundle pairs a matched set of Eris Pro 4 coaxial monitors with the R-TRACK 2x2 USB interface and two 10-foot XLR to 1/4-inch cables, giving you both sides of a recording setup: what goes in and what comes back out. The R-TRACK 2x2 records at 24-bit/192kHz through two mic preamps with 48V phantom power and a Hi/Lo-Z switch, so condenser mics and line-level sources both plug in directly, and its ASIO-licensed driver keeps latency low in whatever DAW you use. MIDI in and out add keyboard and controller support, while a mono/stereo monitoring switch lets you check how a mix translates before you commit. On the output side, the Eris Pro 4 pair uses a single point-source coaxial design for a wide, accurate sweet spot, backed by 80W of power per monitor and Acoustic Space tuning to correct for wall or corner placement. The two RCXFB10B cables, built with 100% copper conductors and a 90% OFC shield, connect the interface's outputs to the monitors without adding noise to the signal path. Together, this is a ready-to-go recording and monitoring rig for a home studio, podcast setup, or small production desk.