PRESONUS SW5E 5-Port AVB Switch w/ PoE, Rack Mountable, Rugged All-Metal Chassis
PRESONUS SW5E 5-Port AVB Switch w/ PoE, Rack Mountable, Rugged All-Metal Chassis
PRESONUS
PRESONUS SW5E 5-Port AVB Switch w/ PoE, Rack Mountable, Rugged All-Metal Chassis
PRESONUS SW5E 5-Port AVB Switch w/ PoE, Rack Mountable, Rugged All-Metal Chassis
5-Port AVB Network Switch, 4 PoE Ports, EtherCON Jacks, All-Metal Chassis, Rack-Mountable
Free Shipping
Features
- Five-port AVB switch with Power over Ethernet on four ports
- Fifth non-PoE port links to additional switches to extend the network
- Secure Ethercon jacks on every port hold up to stage cable strain
- PoE power and network link/activity indicators for fast troubleshooting
- Internal power supply with IEC connector and a front-panel power switch
Couldn't load pickup availability
What's Included in the box
- SW5E 5-port AVB switch
- IEC power cable
SKU: SKU: SW5E
View full details





Product Description
All five ports use secure Ethercon jacks, so a cable pulled at the wrong moment stays connected instead of dropping a monitor mix mid-song. The all-metal chassis handles the load-in and load-out cycle, and the unit screws to a rack tray (not included) when it lives in a permanent install or a touring rack.
Front-panel indicators show PoE power status and network link and activity per port, so tracing a dead monitor takes a glance rather than a laptop. A PoE power on/off control lets you cut power to connected devices without unplugging cables, and the unit has its own power switch. Power comes from an internal supply with a standard IEC connector, so there is no wall wart to lose.
For AVB systems built around StudioLive Series III mixers, EarMix 16M personal monitor mixers, and NSB stage boxes, the SW5E is the piece that ties the network together in one rugged box.
Features
-
Power And Audio On One Cable
Four PoE ports supply power to compatible devices such as personal monitor mixers and stage boxes, which removes separate power runs from the stage layout.
-
Connections That Stay Put
Every port uses a secure Ethercon jack, so a cable caught by a foot or a rolling case will not drop a monitor mix in the middle of a song.
-
Expand The Network
The fifth non-PoE port is there for linking to additional switches, letting you extend an AVB system across a larger stage or a multi-room install.
-
Troubleshoot At A Glance
PoE power indicators and per-port link and activity lights show where signal and power are present, so finding a dead device takes seconds.
-
Rack-Ready Build
A rugged all-metal chassis with an internal power supply and IEC connector screws to a rack tray for touring racks and permanent installations.
Technical Specifications
- Product Type AVB Network Switch
- Ports 5 AVB Ethercon jacks
- PoE Ports 4
- Non-PoE Port 1, for linking to additional switches
- Indicators PoE power indicators, network link/activity indicators
- Controls PoE power on/off, power switch
- Power Internal power supply with IEC connector
- Chassis Rugged all-metal
- Mounting Rack mountable, screws to a rack tray (not included)