(6) RKL65MBW 6.5" Marine Boat Wakeboard Tower Speakers w/LED+Amplifier
Rockville
(6) RKL65MBW 6.5" Marine Boat Wakeboard Tower Speakers w/LED+Amplifier
(6) RKL65MBW 6.5" Marine Boat Wakeboard Tower Speakers w/LED+Amplifier
Six 6.5" LED Speakers, Three Black Single Tower Pods, 6-Ch Marine Amp, Wire Kit
Free Shipping
Features
- Six 6.5" marine LED speakers with beat-sync lighting and dual grilles
- Three pairs of MAC65B black aluminum single tower pods, internally wired
- DBM65 6-channel marine amp with 660W Dyno-Certified RMS power
- RMWK4 4 AWG waterproof wiring kit with tinned-OFC RCA cable
- Universal tower clamps fit 2" to 2.5" diameter poles
Couldn't load pickup availability
What's Included in the box
- (6) RKL65MBW 6.5" Marine LED Speakers
- (3) Sets of Black and White Detachable Grilles
- (3) Sets of 16.4 ft Speaker Wire
- (3) Pairs of MAC65B Black Aluminum Single Wakeboard Tower Pods
- Tower Mounting Hardware with Rubber Inserts (2" to 2.5")
- (1) DBM65 6-Channel Marine Amplifier
- (1) Bass Remote
- (1) PA Microphone
- (1) RMWK4 4 AWG Waterproof Amp Wire Kit
SKU: SKU: (3) RKL65MBW+(3) MAC65B+DBM65+RMWK4
View full details




















Product Description
Each RKL65MBW speaker delivers 350 watts peak with true coaxial design, beat-sync red/blue LEDs, and both black and white grilles included. The MAC65B pods are made from 6061 aircraft-grade aluminum with a black powder-coat finish, internally wired with no exposed terminals. Universal clamps with precision rubber inserts fit tower poles from 2 to 2.5 inches, and the optimized internal airspace delivers strong acoustic output for 6.5-inch drivers. The DBM65 amplifier powers all six channels at 110W RMS per channel at 2 ohms, with a conformal-coated PCB, waterproof terminal covers, and adjustable 12 dB/octave crossovers supporting high pass, low pass, bandpass, and subsonic modes. The RMWK4 kit supplies 18 feet of 4 AWG power cable, 20 feet of tinned-OFC RCA cable, 25 feet of speaker wire, a waterproof fuse holder, and all the terminals needed for a clean marine install.
Features
Single-Pod Mounting Flexibility
Individual MAC65B pods let you position each speaker at a different point on the tower or vehicle frame, spreading coverage wider than dual pods allow.
Aircraft-Grade Aluminum Construction
6061 aluminum pods with black powder-coat finish and internal wiring keep terminals hidden and the entire mount waterproof through salt and fresh water exposure.
Dyno-Certified Amplifier Power
The DBM65 runs 110W RMS per channel at 2 ohms with adjustable crossovers, conformal-coated PCB, and waterproof terminal covers built for marine duty.
Music-Reactive LED Speakers
Beat-sync LEDs in each speaker flash red or blue to your music through the speaker wire, adding visual impact with no extra wiring or installation.
Waterproof Wiring from Start to Finish
The RMWK4 kit includes 4 AWG power cable, tinned-OFC RCA cable, speaker wire, a waterproof fuse holder, and all terminals for a corrosion-resistant connection chain.
Technical Specifications
- Product Type Wakeboard Tower Speaker System (6 Speakers + 6 Single Pods + Amp + Wire Kit)
- Speaker Peak Power 2,100W total (350W per speaker)
- Speaker RMS Power 510W total (85W per speaker)
- Speaker Size 6.5" true coaxial with beat-sync LED
- Amplifier RMS Power 660W Dyno-Certified (110W x 6 at 2 ohm)
- Amplifier Peak Power 2,600W
- Amplifier Channels 6
- Crossover Fully adjustable 12 dB/octave (HP/LP/BP/Subsonic)
- Tower Pod Material 6061 aircraft-grade aluminum, black powder coat
- Tower Pod Type Single 6.5" (individual pods)
- Tower Clamp Fitment 2" to 2.5" diameter poles
- Wire Kit Gauge 4 AWG
- Power Cable Length 18 ft
- RCA Cable Length 20 ft (tinned OFC)
- Speaker Wire Length 25 ft
- Amplifier Dimensions 9" x 2.4" x 19.8"
- Amplifier Weight 12.3 lb