Pair APM5B 5.25" 250W Powered USB Studio Monitor Speakers + 37" Stands

This bundle pairs two bi-amped 5.25" studio monitors with a set of 37" steel speaker stands, giving you a complete listening setup right out of the box. Each monitor runs 125W peak (62.5W RMS) through a Class D amplifier built around ADAU 1701 audio processing and TPA3116 amplification, driving a 3/4" ferrofluid-cooled neodymium silk dome tweeter and a 5.25" polypropylene woofer with rubber surrounds. The MDF wood enclosures are 0.5" thick with a full 1" front baffle, tuned for accurate bass response through a rear-firing port. Inputs include a 1/4" and XLR combo jack, USB, and RCA, plus a 3.5mm headphone output, so you can connect from a mixer, interface, or straight from your computer without an external DAC.

The RS37B stands are built from thick steel tubing with a 60 lb load capacity per stand. EVA isolation pads on top reduce vibrations, while adjustable brass spikes and rubber feet handle carpet or hard floors. Cable management holes in the top and bottom of each pole let you run wires out of sight. At 37", these stands place the tweeters at seated ear level in most studio and living room setups, which is exactly where you want them for accurate stereo imaging.