RCM03 Studio Recording Condenser Microphone Mic+Boom Arm+Desk Clamp

This recording bundle pairs the RCM03 aluminum condenser microphone with the DMS40 40-inch boom arm and desk clamp, delivering a studio setup that keeps your desk surface open while positioning the mic exactly where your sound source is. The DMS40 clamps to any desk up to 2 inches thick with an aluminum alloy C-clamp and extends two 20-inch arm segments with internal springs, reaching a full 40 inches from the mount point to the capsule.

The RCM03 features a 16mm electret condenser diaphragm in a cardioid polar pattern, tuned for natural vocal and acoustic reproduction across 30 Hz to 20 kHz. Its sensitivity of -29 dB and 74 dB signal-to-noise ratio keep recordings clean, and the noise floor stays under 18 dBA. The aluminum body and steel basket give the mic real structure, and the included metal shock mount isolates it from any vibrations that travel through the boom arm. Two 10-foot copper cables come in the box: a 3.5mm-to-XLR for connecting straight to a computer sound card and an XLR-to-XLR for a mixer or audio interface with 48V phantom power. A metal anti-wind cap handles close-mic air movement. The boom arm repositions silently thanks to its internal spring design, so adjustments during a session do not bleed into the take.