LCMR-6.5 8 Ohm
SUNDOWN AUDIO
LCMR-6.5 8 Ohm
LCMR-6.5 8 Ohm
6.5" Midrange Speaker, 100W RMS, 8-Ohm, 120Hz-6kHz Range, Phase Plug, Sold Individually
Features
- 100W RMS handling in a dedicated 120Hz to 6kHz midrange
- Phase plug improves off-axis response and cools the coil
- 92dB sensitivity delivers strong output on moderate power
- 8-ohm load suits paralleling several speakers in an array
- 1.51" voice coil in a ferrite motor for consistent output
Couldn't load pickup availability
What's Included in the box
- 1 x Sundown Audio LCMR-6.5 6.5" Midrange Speaker (8 Ohm)
SKU: SKU: LCMR-6.5 8 Ohm
View full details







Product Description
A phase plug replaces the conventional dust cap, keeping response consistent off-axis and moving heat away from the voice coil. The 1.51-inch coil rides in a ferrite motor, and sensitivity is 92 dB, so it plays loud on reasonable power. With an 83.27 Hz resonant frequency and a Qts of 0.409, it behaves predictably on an open baffle or in a door with an active crossover in front of it.
The 8-ohm load is built for arrays. Two in parallel make 4 ohms and four make 2 ohms, which is how door and pillar builds stack midranges without overloading an amplifier. Mounting takes a 5.82-inch cutout and 3.5 inches of depth behind a 6.51-inch outer diameter frame.
Sold individually so you can build a pair or a wall of them.
Features
-
Clarity Where It Counts
Covering 120 Hz to 6 kHz only, this speaker puts all 100W RMS into vocals and guitars instead of splitting effort across the full range.
-
Consistent Off Axis
A phase plug in place of a dust cap keeps response even when you are not sitting directly in front, which matters for door-mounted midranges.
-
Cooler Voice Coil
The phase plug also channels heat away from the 1.51-inch coil, so output holds steady through long, high-volume demo sessions.
-
Made For Arrays
An 8-ohm load lets you parallel two for 4 ohms or four for 2 ohms, building multi-speaker doors and pillars without stressing an amplifier.
-
Predictable Install Numbers
A 5.82-inch cutout, 3.5-inch depth, and 6.51-inch frame diameter give you the figures needed to cut baffles before the speakers arrive.
Technical Specifications
- Product Type 6.5" Car Audio Midrange Speaker
- RMS Power 100W
- Impedance 8 Ohms
- Frequency Range 120Hz - 6kHz
- Sensitivity 92 dB +/- 2dB (1W/1m)
- Configuration Sold individually
- Dust Cap Phase plug
- Magnet Material Ferrite
- Voice Coil Diameter 1.51"
- Re 3.2 Ohms
- Fs 83.27 Hz
- Vas 7.5 L
- Qes 0.43
- Qms 4.1
- Qts 0.409
- Cms 0.24 MM/N
- BL 6.3 N/A
- Sd 12.469 Mm
- Outer Diameter 6.51"
- Cutout Diameter 5.82"
- Mounting Depth 3.50"