CQS-1225 25 Ft 12 Gauge 1/4" to Speakon Speaker Cable

The CQS-1225 is a 25 ft speaker cable terminated with a 1/4" plug on one end and a Speakon connector on the other, which is the exact pairing needed when a 1/4" amplifier output has to reach a cabinet with a Speakon input. The 12 gauge conductor is the practical reason to choose this cable over thinner stock: heavier copper means less resistance across a 25 ft run, so more amplifier power arrives at the speaker instead of turning into heat in the cable. Low noise shielding keeps signal transfer clean across the full frequency range, which matters most on long runs near lighting rigs and power cords where interference shows up. The 25 ft length covers the common distance from a rack or DJ booth to a speaker on a stand at either side of a stage, with enough slack to route the cable safely around foot traffic instead of straight across it. The black jacket keeps it unobtrusive on a dark stage or in a permanent install. Technical Pro builds its cable line with high quality terminations and large gauge design, and the range spans 1 ft to 100 ft with connector options including 1/4", dual 1/4", banana plug, Speakon, XLR male, XLR female, RCA, dual RCA, and 1/8". Use the CQS-1225 for mobile DJ rigs, band backlines, house of worship systems, school auditoriums, and studio monitoring setups.