MM2000BT

The MM2000BT is a mic mixing amplifier for setups where vocals carry the show and rack space is limited. Six microphone inputs are split across four 1/4" unbalanced connections for short runs and two XLR balanced connections for longer cable runs where noise pickup becomes an issue. The 1/4" inputs share two volume knobs covering inputs 1-2 and 3-4, while each XLR input gets its own volume control. Mic inputs are divided into two channels with hi, mid, low, and echo controls, and the echo section adjusts five separate aspects of the effect rather than one blanket amount. As a power amplifier it reaches 2000W peak with 355 W RMS per channel, which supports more demanding passive speakers while keeping output clean from source to cabinet. Outputs include banana binding posts for four speakers, bare speaker wire terminals, an RCA line out, and a 3.5mm headphone connection. As a receiver it takes two RCA sources, USB, SD card up to 32 GB, Bluetooth v2.0 with EDR at 30 ft, a 3.5mm MP3 input, and a built-in tuner, and it plays .mp3, .wav, and .wma files. Dual 10-band equalizers with points from 32Hz to 16KHz and plus or minus 12dB of adjustment let you shape output for the room. Recording captures to SD or USB at 128 kbps and 44.1 KHz on .wav. Frequency response is 20Hz to 20KHz, with a built-in fan. 19" x 10" x 5", 14 lb, 110/220V.