POWER65 6,500W 2-Channel 2U Power Amplifier

The POWER65 is a two-channel power amplifier in a 2U rack chassis, rated at 6500W peak with 190W RMS per channel at 8 ohms. It is built for the middle of a signal chain: take a line level feed from a mixer or DJ controller and send real power to passive cabinets. Input options cover XLR, 1/4", and RCA, so it accepts a balanced feed from a stage snake or an unbalanced feed from a DJ mixer without adapters. Outputs include banana binding posts, Speakon, and 1/4", which means it connects to almost any speaker cable already in your case. Input impedance is 20 kohm balanced and 10 kohm unbalanced, with input sensitivity at .775V (0dBu), standard figures that match typical mixer output levels. The performance numbers are where this amplifier earns its place: frequency response of 20Hz to 20kHz within plus or minus 1 dB, total harmonic distortion under 0.02%, a signal to noise ratio of -105 dB unweighted, and a damping factor above 200 at 8 ohms, which translates to tight control over woofer movement. A spectrum LED display and precise LED meters show signal and clip status, with protect indicators so you can see a fault before it becomes a repair. Dual cooling speed fans and the CAF Complete Air Flow ventilation system run automatic variable speed for quiet operation, keeping fan noise out of quiet passages. High-quality components and rugged construction suit touring racks, club installs, and rental inventory.