VRTX215LED
TECHNICAL PRO
VRTX215LED
VRTX215LED
Dual 15" 7-Way Passive Speaker Cabinet, 1800W Peak, Carpeted Wood Build With LED Woofers and Steel Grill
Free Shipping
Features
- 1800W peak handling at 8 ohms with 99 dB sensitivity for loud output
- Two 15" woofers with 2.5" voice coils and 50 oz. magnets reach down to 45Hz
- 7-way design adds a horn compression driver mid and four piezo tweeters
- Carpeted wood cabinet with perforated steel grill and reinforced corners
- Stackable with two carry handles and 1/4" or bare wire connections
Couldn't load pickup availability
What's Included in the box
- Technical Pro VRTX215LED Dual 15" Passive Speaker Cabinet
SKU: SKU: VRTX215LED
View full details





Product Description
Because it is passive, you choose the amplifier and keep the power stage in the rack rather than in the cabinet. Inputs accept 1/4" cable or bare wire, which makes it simple to add to an existing rig, run as a mains pair, or wire into a permanent install.
Construction matches the use case. The wood cabinet is carpet-covered to survive repeated loading, a full-length perforated steel grill takes hits without collapsing onto the drivers, and reinforced corners absorb the knocks that come with van transport. Two integral carry handles and a stackable shape mean two cabinets travel and set up as a pair.
LED-lit woofers add visual movement at weddings, school dances, bar gigs, and outdoor events where the rig is part of the show. At 70 lb and 19.25" L x 13.5" W x 48.5" H, the cabinet stands on its own without a pole or tripod, which saves setup time and keeps the low end coupled to the floor.
Features
-
Volume From A Single Cabinet
Two 15" woofers, a horn-loaded mid, and four piezo tweeters share 1800W peak handling, filling mid-size rooms and outdoor sets from one box per side.
-
Low End You Can Feel
Each 15" woofer uses a 2.5" voice coil and 50 oz. magnet, reaching 45Hz so kick drums and bass lines stay solid at high volume.
-
Built For The Road
Carpet-covered wood, reinforced corners, and a full-length perforated steel grill take the scrapes of weekly load-in without leaving the drivers exposed.
-
Pair It With Your Own Amp
The passive design keeps power in your rack, and 1/4" or bare wire inputs let the cabinet slot into an existing rig or permanent install.
-
Lights That Match The Set
LED-lit woofers move with the music, adding visual interest at weddings, school dances, and bar gigs where the rig sits in full view.
Technical Specifications
- Product Type Passive PA Speaker Cabinet
- Peak Power 1800W
- Configuration 7-way
- Frequency Response 45Hz-20kHz
- Woofers Two 15" woofers, 2.5" voice coil, 50 oz. magnet
- Mid 5" x 15" horn, compression driver, 1.5" voice coil, 25 oz. magnet
- Tweeters 4 piezo
- Impedance 8 ohms
- Sensitivity 99 plus or minus 2dB (1W@1M)
- Inputs 1/4", bare wire
- Cabinet Carpet-covered wood, full-length perforated steel grill
- Features Stackable, reinforced corners, 2 integral carry handles, LED woofers
- Weight 70 lb
- Dimensions 19.25" L x 13.5" W x 48.5" H