VMA1240 + (4) Control 25-1-WH
JBL
VMA1240 + (4) Control 25-1-WH
VMA1240 + (4) Control 25-1-WH
240W 70V Bluetooth Mixer Amp, 5 Inputs, (8) 5.25" White Wall-Mount Speakers for Restaurants, Bars, Retail
Features
- 240W VMA1240 mixer amplifier powers 70V and 100V distributed speaker lines
- Five inputs with Bluetooth and USB stick playback for music from any source
- Voice-activated ducking lowers music automatically during mic announcements
- Eight white Control 25-1 two-way speakers with 5.25" woofers and 0.75" tweeters
- IP-44 weatherized cabinets with 30W, 15W, 7.5W, and 3.7W transformer taps
Couldn't load pickup availability
What's Included in the box
- (1) VMA1240 240W 70V Bluetooth Mixer/Amplifier
- (1) Rack Mount Kit
- (8) Control 25-1 5.25" White Wall-Mount Speakers (4 Pairs)
- (8) InvisiBall Mounting Hardware Sets
SKU: SKU: VMA1240+(4) Control 25-1-WH
View full details










Product Description
Four pairs of white Control 25-1 speakers, eight in total, spread that sound across bigger floor plans and multiple seating areas. Each two-way cabinet pairs a 5.25" woven-fiberglass woofer with a 0.75" PEI tweeter for clear vocals and full background music, and a 100 x 100 degree coverage pattern keeps levels even for guests seated off to the side. Built-in multi-tap transformers offer 30W, 15W, 7.5W, and 3.7W settings on a 70V line, so you can run speakers louder near the bar and softer in a quiet corner while staying within the amp's 240W output. IP-44 rated, weatherized enclosures hold up on covered patios and in humid rooms, InvisiBall mounting hardware keeps installs clean, and the white cabinets accept paint to match your walls.
Features
Complete Commercial Sound System
One 240W mixer amp and eight matched wall-mount speakers give a larger restaurant, bar, or shop everything needed for background music and paging in one kit.
Stream, Plug In, or Page
Five inputs cover Bluetooth, USB sticks, RCA, 1/4", and Euroblock sources, plus 27V phantom power, so phones, mics, and media players connect directly to the amp.
Clear Announcements Every Time
Voice-activated ducking drops the music level the moment someone speaks into the mic, so specials, table calls, and closing announcements cut through without manual adjustments.
Cover More of the Room
Eight speakers with 100 x 100 degree coverage and 30W to 3.7W 70V taps spread even sound across dining rooms, bar areas, and patios, louder or softer by zone.
Built for Busy, Humid Spaces
IP-44 rated weatherized enclosures, Kapton voice coil formers, and zinc-plated grilles stand up to kitchen humidity, covered patios, and years of daily service.
Technical Specifications
- Product Type 70V Commercial Mixer Amplifier and Wall-Mount Speaker System
- Amplifier Output Power 240W into 4 or 8 Ohms
- Amplifier Outputs 4/8 Ohm, 70V, 100V
- Input Channels 5
- Input Types Euroblock, RCA, 1/4", Bluetooth, USB
- Tone Controls Bass ±14 dB @ 50 Hz, Treble ±14 dB @ 10 kHz per channel
- Phantom Power 27 VDC
- Signal to Noise Ratio >76 dB
- Amplifier THD <0.5%, 20 Hz to 20 kHz
- Amplifier Frequency Response 20 Hz to 20 kHz ±2 dB (4/8 Ohm), 80 Hz to 15 kHz ±3 dB (70V/100V)
- AC Power 100, 120, 220 to 240 VAC, 50/60 Hz
- Speaker Quantity 8 (4 Pairs)
- Speaker LF Driver 5.25" Woven-Fiberglass Cone
- Speaker HF Driver 0.75" PEI Diaphragm
- Speaker Power Rating 200W Continuous Program, 100W Pink Noise (400W Peak)
- Speaker Impedance 8 Ohms (Thru)
- Transformer Taps 70V: 30W, 15W, 7.5W, 3.7W; 100V: 30W, 15W, 7.5W
- Speaker Sensitivity 90 dB, 1W/1m
- Speaker Frequency Response 85 Hz to 17 kHz ±3 dB, 60 Hz to 20 kHz ±10 dB
- Coverage Angle 100° x 100°
- Speaker Enclosure High-Impact Polystyrene, White
- Environmental Rating IP-44
- Amplifier Weight 25.5 lb
- Speaker Weight 7.5 lb each
- Amplifier Dimensions (W x D x H) 17" x 16.3" x 3.5"
- Speaker Dimensions (H x W x D) 9.6" x 7.4" x 5.7"