(2) JRX212 + (2) JRX218S + (2) RSP36 + RPM1470

This package puts a full stereo PA and the mixer to power it in one order: two JBL JRX212 12" two-way speakers, two JRX218S 18" compact subwoofers, two Rockville RSP36 steel mounting poles, and a Rockville RPM1470 14-channel powered mixer. Plug in mics, guitars, keys, and a phone, and the RPM1470's built-in amplifier (500W x 2 RMS at 8 ohms, 750W x 2 RMS at 4 ohms) gives the passive cabinets their power without a separate amp in the rack.

The subs handle the low end down to 34 Hz with up to 133 dB peak output, while each JRX212 covers 60 Hz to 20 kHz through a 12" woofer and a JBL 2414H-C 1" compression driver on a Progressive Transition waveguide. SonicGuard protects that high-frequency driver from excess power without cutting the show. Each RSP36 pole drops into the sub's top-mounted 36 mm receptacle and lifts the JRX212 above the crowd, and the speaker's dual-angle socket tilts it 10° toward the audience. Off the pole, the JRX212 doubles as a floor wedge monitor.

At the mixer, 14 XDR2 low-noise mic preamps with switchable +48V phantom power take dynamic and condenser mics. Every channel gets a 4-band EQ, aux send, pad, mute, and solo, and a dual 7-band graphic EQ shapes the mains and monitors. Sixteen 24-bit effects add reverb, delay, and chorus, Bluetooth and USB play backing tracks, and you can record the main mix straight to USB or SD card. It's a fit for DJs, bands, churches, and event spaces that want one matched system from microphone to speaker.