JRX215 PA System with RPA12 Amp and Stands

This JRX215 package gives DJs, bands, and event hosts a complete passive PA system in one order: two 15" two-way speakers, an RPA12 power amplifier, a pair of 25' Speakon cables, and a pair of tripod stands with a carrying case. Every piece is chosen to work with the others, so there's no guesswork about power matching or connectors. Each JRX215 pairs a 15" low frequency driver with a 1" compression driver on a Progressive Transition waveguide, reaching 129 dB max SPL across a 41 Hz to 18 kHz frequency range. The RPA12 puts out 2 x 500W RMS into 8 ohms, right inside the 250W to 500W recommended for each speaker, and its Speakon outputs connect straight to the speakers' NL-4 inputs with the included 14 AWG, 100% copper cables.

The amp's built-in limiter and the SonicGuard circuit on each speaker's high frequency driver help keep the system clean when the volume climbs. A crossover switch (bypass, 80 Hz, 160 Hz), bridged mode, and an XLR link output leave room to add a subwoofer or second amp later. The 2U rack-mount amp fits a standard rack case, and the steel tripod stands hold up to 132 lb each, well above the 60.5 lb weight of each cabinet. Dual-angle pole sockets let you tilt each speaker 10 degrees down toward the crowd. Wedding receptions, club nights, church services, backyard parties, and live band gigs all suit this rig, and the carrying case keeps the stands together between shows.