JRX215 Pair + RPM85 Powered Mixer + Stands

This package gives DJs, bands, and event hosts a complete PA system in one order: two JBL JRX215 15" passive speakers, a Rockville RPM85 8-channel powered mixer, a pair of tripod stands, and the two speaker cables that tie it all together. Each JRX215 pairs a 15" low-frequency driver with a 1" JBL 2414H-C compression driver on a Progressive Transition waveguide, handling 250W continuous (1000W peak) with a 41 Hz to 18 kHz frequency range and up to 129 dB maximum SPL. SonicGuard circuitry protects the high-frequency driver from excess power without cutting the music, which matters on long nights when the volume keeps climbing.

The RPM85 powers both cabinets directly at 225W x 2 RMS into 8 ohms, so there's no separate amplifier to buy or rack. Eight channels with balanced XLR and 1/4" TRS inputs take a mix of mics, instruments, and line sources, and each channel gets its own volume, reverb, bass, and treble controls. Built-in Bluetooth, USB, and SD playback cover background music between sets, while the illuminated 5-band graphic EQ, echo and delay effects, and +15V phantom power round out the board. A 1/4" line output leaves room to add a powered subwoofer later.

Setup is quick. The included 20' 1/4" to SpeakOn NL-4 cables run from the mixer's speaker outputs to each cabinet, and the steel tripod stands, rated for 132 lb, lift the speakers above the crowd for wider coverage. Each JRX215 also has a dual-angle pole-mount socket that tilts the cabinet 10 degrees down toward the audience. It's a strong fit for weddings, church services, school events, bar gigs, and rehearsal spaces.