CSMA280 + (4) Control 25-1 + (2) CSR-V Black
JBL
CSMA280 + (4) Control 25-1 + (2) CSR-V Black
CSMA280 + (4) Control 25-1 + (2) CSR-V Black
70V Sound System, 2 x 80W Mixer Amp, (4) 5.25" Speakers, (2) Volume Controls for Restaurants
Features
- CSMA280 mixer amp delivers 2 x 80W across two independent output zones
- Built-in transformer runs 70V and 100V speaker lines with no extra hardware
- 8 mic/line inputs with euroblock, RCA, and 27V phantom power
- Four Control 25-1 5.25" two-way speakers with 100° x 100° coverage
- Two CSR-V black wall controls set volume locally in each zone
Couldn't load pickup availability
What's Included in the box
- (1) JBL CSMA280 Commercial Mixer Amplifier
- (4) JBL Control 25-1 5.25" Wall-Mount Speakers (2 Pairs)
- (2) JBL CSR-V Black Wall Volume Controllers
- Control 25-1 InvisiBall Mounting Hardware
SKU: SKU: CSMA280+(2) Control 25-1+(2) CSR-V-BLK
View full details










Product Description
Two output channels make zoning simple. Run one pair of speakers in the main room and the other at the bar or in outdoor seating, then mount a CSR-V controller in each space so staff can set the level right where they stand, connected back to the amp over RJ45. Voice-activated ducking on channels 1 and 5 lowers the background music when someone talks into the paging mic, and priority muting cuts every other channel for announcements.
Each Control 25-1 pairs a 5.25" woven-fiberglass woofer with a 0.75" PEI tweeter and 100° x 100° coverage, so guests seated off to the side still hear clear, natural sound. IP-44 rated, weather-protected enclosures suit indoor and outdoor spaces, and InvisiBall mounting hardware keeps the install clean. When the room goes quiet, sleep mode powers the amplifier down after about 30 minutes without signal.
Features
Two-Zone Sound From One Amp
The CSMA280 sends 80W to each of its two output channels, so a dining room and a bar or patio get their own music and volume from one unit.
Direct 70V And 100V Operation
A built-in output transformer drives 70V or 100V distributed lines directly, letting you run long speaker wire across a venue without adding a separate transformer.
Paging That Talks Over Music
Voice-activated ducking on channels 1 and 5 lowers background music when someone speaks, and priority muting silences every other channel for important announcements.
Clear Coverage Across The Room
Each Control 25-1 combines a 5.25" woven-fiberglass woofer and 0.75" PEI tweeter with 100° x 100° dispersion, so off-axis seats still hear balanced sound.
Local Volume In Every Zone
Two CSR-V wall controllers connect to the amp's RJ45 ports, giving staff a simple knob in each area instead of a trip to the equipment rack.
Technical Specifications
- Product Type Commercial 70V/100V Sound System Bundle
- Amplifier Output Power 2 x 80W
- Amplifier Inputs 8 (Mic/Line Euroblock, RCA)
- Amplifier Outputs 2 Channels, 4/8 Ohm or 70V/100V
- Phantom Power 27 VDC
- Amplifier Frequency Response 20 Hz to 20 kHz ±2 dB (4/8 Ohm), 80 Hz to 15 kHz ±2 dB (70V/100V)
- Signal to Noise Ratio Greater than 90 dB
- Remote Volume Ports 2 x RJ45
- AC Input 100-240 VAC, 50/60 Hz
- Speaker Drivers 5.25" Woven-Fiberglass Woofer, 0.75" PEI Tweeter
- Speaker Power Rating 200W Continuous Program, 100W Pink Noise (400W Peak)
- Speaker Transformer Taps 70V: 30W, 15W, 7.5W, 3.7W; 100V: 30W, 15W, 7.5W
- Speaker Impedance 8 Ohms (Thru)
- Speaker Frequency Response 60 Hz to 20 kHz (±10 dB)
- Speaker Sensitivity 90 dB (1W/1m)
- Speaker Coverage 100° x 100°
- Speaker Environmental Rating IP-44
- Color Black
- Amplifier Weight 11.9 lb (5.4 kg)
- Amplifier Dimensions (W x D x H) 17.2 x 11.9 x 1.7 in (436.9 x 302.3 x 43.2 mm)